OT 100/120…277/700 P5

Product family benefits
  • High surge protection: up to 6 kV (L-N) / 6 kV (L/N-PE)
  • High efficiency
  • Great flexibility due to wide operating temperature range of -40…50 °C or 55 °C
  • IP rating: IP65
Areas of application
  • Street and urban lighting
  • Industry
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal voltage

120…277 V

Input voltage AC

108…305 V

Permitted voltage range

Nominal current

0.49 A

At 230 V/1.00 A for 120 VAC

Mains frequency

50…60 Hz

Power factor λ

0.95/0.90

Minimum/Full load at 230 V/Half load at 230 V

Total harmonic distortion

10 %

Max. output power at 230 VAC

Device power loss

12 W

Maximum

Inrush current

100 A

twidth = 200 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

4

Type B

Max. ECG no. on circuit breaker 16 A (B)

7

Type B

Max. ECG no. on circuit breaker 25 A (B)

12

Type B

Surge capability (L/N-Ground)

6 kV

Surge capability (L-N)

6 kV

@ 2 Ohm, acc. to EN61547

Nominal output power

100 W

Partial Load 39…100 W

Maximum output power

100 W

Efficiency in full-load

90 %

at 230 V, 50 Hz

Nominal output voltage

55…152 V

U-OUT (working voltage)

220 V

Nominal output current

700 mA

±5%

Output current tolerance

±5 %

Galvanic isolation

double/reinforced

Dimensions & weight

Length

168.0 mm

Width

60.0 mm

Height

39.0 mm

Mounting hole spacing, length

152.0 mm

Product weight

665.00 g

Cable cross-section, input side

0.5 mm²

Cable cross-section, output side

0.5 mm²

Wire preparation length, input side

10 mm

Cable/wire length, input side

280 mm

± 30 mm

Cable/wire length, output side

280 mm

± 30 mm

Cable/wire length, control input

-

Temperatures & operating conditions

Ambient temperature range

-40…+55 °C

Temperature range at storage

-25…80 °C

Maximum temperature at tc test point

85 °C

Maximum at the Tc-point

Max.housing temperature in case of fault

120 °C

Lifespan

ECG lifetime

80000 h

At Tcase = 75°C at Tc point / 10% failure rate

ECG ambient temperature (ta)

55 °C

50 °C

45 °C

Temperature at the measuring point tc (°C)

85 °C

80 °C

75 °C

ECG lifespan (h)

50000 h

Max. 10% failure rate at tc max and input voltage 230 VAC

65000 h

Max. 10% failure rate at tc max and input voltage 230 VAC

80000 h

Max. 10% failure rate at tc max and input voltage 230 VAC

Capabilities

Dimmable

No

Suitable for fixtures with prot. class

I

Intended for no-load operation

No

Number of channels

1

Certificates & standards

Type of protection

IP65

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61547/Acc. to FCC 47 part 15 class B/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3

Approval marks – approval

CE / CQC

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

02-06-2023

Primary Article Identifier

4052899259065

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

9f8a50e8-71d3-4b8c-9e8f-6219b7c2bcee

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899259065 UNV

Unpacked

1 168mm x 60mm x 39mm 665.00g 0.39dm³
4052899259072 VS

Shipping box

20 491mm x 287mm x 217mm 14475.00g 30.58dm³

Downloads

Information about Family

The OPTOTRONIC LED constant current driver family has options to suit a range of wattages, with input voltage from 120…277 V and an output current of 700 mA. It protects your light installation from overtemperature and gives high surge protection of up to 6 kV (L-N) / 6 kV (L/N-PE). Suitable for use outside in street lighting, urban applications and industrial lighting, and for use in luminaires of protection class I, this highly efficient and reliable power supply gives you high IP protection (IP65) and a wide operating temperature range.
Product family features
  • Available with different wattage: 50 W, 100 W, 180 W, 250 W
  • Input voltage: 120…277 V
  • Output current: 700 mA
  • Overtemperature protection
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output current
Length
Width
Height
Data sheet
OT 50/120…277/700 P5
700 mA 168.0 mm 50.0 mm 30.0 mm
OT 100/120…277/700 P5
700 mA 168.0 mm 60.0 mm 39.0 mm
OT 180/120…277/700 P5
700 mA 251.0 mm 60.0 mm 39.0 mm