OT 180/120…277/700 P5
.jpg)
.jpg)
Product family benefits
- High surge protection: up to 6 kV (L-N) / 6 kV (L/N-PE)
- High efficiency
- Great flexibility due to wide operating temperature range of -40…50 °C or 55 °C
- IP rating: IP65
Areas of application
- Street and urban lighting
- Industry
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal voltage
120…277 V
Input voltage AC
108…305 V
Nominal current
0.86 A
Mains frequency
50…60 Hz
Power factor λ
0.95/0.90
Total harmonic distortion
10 %
Device power loss
18 W
Inrush current
110 A
Max. ECG no. on circuit breaker 10 A (B)
4
Max. ECG no. on circuit breaker 16 A (B)
7
Max. ECG no. on circuit breaker 25 A (B)
12
Surge capability (L/N-Ground)
6 kV
Surge capability (L-N)
6 kV
Nominal output power
180 W
Maximum output power
180 W
Efficiency in full-load
90 %
Nominal output voltage
115…257 V
U-OUT (working voltage)
290 V
Nominal output current
700 mA
Output current tolerance
±5 %
Galvanic isolation
basic
Dimensions & weight
Length
251.0 mm
Width
60.0 mm
Height
39.0 mm
Mounting hole spacing, length
236.3 mm
Product weight
1000.00 g
Cable cross-section, input side
0.75 mm²
Cable cross-section, output side
0.5 mm²
Wire preparation length, input side
10 mm
Cable/wire length, output side
355 mm
Cable/wire length, input side
355 mm
Temperatures & operating conditions
Ambient temperature range
-40…+55 °C
Temperature range at storage
-25…80 °C
Maximum temperature at tc test point
90 °C
Max.housing temperature in case of fault
120 °C
Lifespan
ECG lifetime
80000 h
ECG ambient temperature (ta) |
55 °C |
50 °C |
45 °C |
|---|---|---|---|
Temperature at the measuring point tc (°C) |
90 °C |
85 °C |
80 °C |
ECG lifespan (h) |
50000 h |
65000 h |
80000 h |
Capabilities
Dimmable
No
Suitable for fixtures with prot. class
I
Intended for no-load operation
No
Number of channels
1
Certificates & standards
Type of protection
IP65
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61547/Acc. to FCC 47 part 15 class B/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3
Approval marks – approval
CE / CQC
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
14-04-2022
Primary Article Identifier
4052899259027
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
343c437a-f807-49cb-a062-3e8d8b8ae526
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899259027 |
UNV
| 1 | |||
| 4052899281158 |
VS
| 10 | 491mm x 330mm x 140mm | 11087.00g | 22.68dm³ |
Downloads
Data sheets
Information about Family
The OPTOTRONIC LED constant current driver family has options to suit a range of wattages, with input voltage from 120…277 V and an output current of 700 mA. It protects your light installation from overtemperature and gives high surge protection of up to 6 kV (L-N) / 6 kV (L/N-PE). Suitable for use outside in street lighting, urban applications and industrial lighting, and for use in luminaires of protection class I, this highly efficient and reliable power supply gives you high IP protection (IP65) and a wide operating temperature range.
Product family features
- Available with different wattage: 50 W, 100 W, 180 W, 250 W
- Input voltage: 120…277 V
- Output current: 700 mA
- Overtemperature protection
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|
|
OT 50/120…277/700 P5
|
700 mA | 168.0 mm | 50.0 mm | 30.0 mm | ||
|
OT 100/120…277/700 P5
|
700 mA | 168.0 mm | 60.0 mm | 39.0 mm | ||
|
|
OT 180/120…277/700 P5
|
700 mA | 251.0 mm | 60.0 mm | 39.0 mm |
