OPTOTRONIC FIT D L

Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 50 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 350 mA
  • Non-isolated drivers
Product family benefits
  • Small housing design
  • Fixed current
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High quality of light thanks to low output ripple current
  • High efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 30/220…240/125 D L
54…216 V 125 mA 210.0 mm 30.0 mm 21.0 mm
OT FIT 45/220…240/200 D L
54…216 V 200 mA 210.0 mm 30.0 mm 21.0 mm
OT FIT 50/220…240/250 D L
54…216 V 250 mA 210.0 mm 30.0 mm 21.0 mm
OT FIT 50/220…240/300 D L
54…175 V 300 mA 210.0 mm 30.0 mm 21.0 mm
OT FIT 50/220…240/350 D L
54…150 V 350 mA 210.0 mm 30.0 mm 21.0 mm

Information about Family

Optimized price/feature ratio – great featureset for budget pricing.

Remarkable about this product is the small housing which is only 210mm long and the high efficiency of up to 90%. A dedicated current per driver and a low ripple contributing to the lighting quality mark some additional characteristics. This device is also suitable for emergency lighting units.
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now