OPTOTRONIC FIT D LT2 L

Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 120 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 750 mA
  • Non-isolated drivers
Product family benefits
  • Flexible current setting (LEDset2)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High quality of light thanks to low output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 25/220…240/300 D LT2 L
40…216 V 35…300 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 35/220…240/350 D LT2 L
54…216 V 65…350 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 75/220…240/550 D LT2 L
54…216 V 125…550 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 120/220…240/750 D LT2 L
54…216 V 250…700 mA 360.0 mm 30.0 mm 21.0 mm

Information about Family

De-risk your business - easy, wide range of usage, flexible.

High efficiency of up to 93% and wide operating windows of up to 750mA pose the highlights of this LED Driver. The current is programmable by LEDSet2 (LT2) and a low ripple contributes to the lighting quality. This device is also suitable for emergency lighting units.
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads