OPTOTRONIC Intelligent – DALI LT2

Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
  • RI suppression: to EN 55015/CISPR 15
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h
  • Type of protection: IP20
  • Independent connection via through-looping (except OTi DALI 15)
Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Very high efficiency
  • Protection of the system thanks to thermal management and Smart Control
  • High-quality dimming of 1…100 % by amplitude dimming
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 15/220…240/1A0 LT2
7.5…54 V 150…1050 mA 95.0 mm 53.0 mm 30.0 mm
OTi DALI 25/220…240/700 LT2
12…54 V 180…700 mA 103.0 mm 67.0 mm 29.5 mm
OTi DALI 35/220…240/1A0 LT2
15…54 V 350…1050 mA 103.0 mm 67.0 mm 29.5 mm
OTi DALI 50/220…240/1A4 LT2 FAN
15…54 V 600…1400 mA 110.0 mm 75.0 mm 25.0 mm

Information about Family

Intelligent compact SELV DALI drivers for premium lighting.

This Compact LED Driver is fully digitally programmable by DALI and LT2 and includes 1…100% dimming. The very wide operating window and an optional cable clamp for independent installation and through-looping allow some flexibility in its usage.
Areas of application
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Installation via Cable Clamp Kit possible (depending on version of product)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads