OTi DALI 35/220 240/1A0 LT2
- Versatile DALI window driver due to flexible output characteristic
- Very high efficiency
- Protection of the system thanks to thermal management and Smart Control
- High-quality dimming of 1 100 % by amplitude dimming
- Easy to use in corridors and restrooms because of three-level Corridor function
- Touch DIM application: easy to control via pushbutton or sensor
- Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
- Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
- Feedback of power consumption and operating hours (Fit for SMART GRID)
- Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
- Suitable for indoor SELV installations
- Suitable for luminaires of protection classes I and II
- Suitable for downlights, spotlights and LED panels
- Installation via Cable Clamp Kit possible (depending on version of product)
Technical Data
Electrical data
Nominal input voltage
220 240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198 264 V
Input voltage DC
176 276 V
Total harmonic distortion
< 20 %
Power factor λ
0.72C...0.95
Efficiency in full-load
89 %
Device power loss
5.7 W
Inrush current
< 20 A
Max. ECG no. on circuit breaker 10 A (B)
35
Max. ECG no. on circuit breaker 16 A (B)
55
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
15 54 V
U-OUT (working voltage)
60 V
Nominal output current
350 1050 mA
Output current LEDset open
175 mA
Output current LEDset shorted
700 mA
Default output current
700 mA
Output current tolerance
±3 %
Output ripple current (100 Hz)
< 2 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
35 W
Maximum output power
35 W
Power loss in stand-by mode
<0.1 W
Current set
DALI / LEDset2
Networked standby power
≤0.10 W
Galvanic isolation primary/secondary
SELV
Galvanic isolation DALI/mains
Basic
Galvanic isolation DALI/output
SELV
Dimensions & weight
Mounting hole spacing, length
94.0 mm
Mounting hole spacing, width
58.0 mm
Product weight
149.00 g
Cable cross-section, input side
0.2 1.5 mm²
Cable cross-section, output side
0.2 1.5 mm²
Wire preparation length, input side
8.0 9.0 mm
Wire preparation length, output side
8.0 9.0 mm
Width
67.0 mm
Height
29.5 mm
Length
103.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20 +50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-25 85 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
50000 / 100000 h
Capabilities
Dimmable
Yes
Dimming interface
DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range
1 100 %
Dimming method
Amplitude Modulation
Constant lumen function
Programmable
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Suitable for emergency lighting
Yes
Type of connection, output side
Push terminal
Number of channels
1
Suitable for through-wiring
Yes with optional cable clamp
DALI-2 Diagnostic Data
Yes
DALI-2 Energy Data
Yes
Programming interface
DALI, LEDset
Programming
Tuner4TRONIC Field App
No
Programming device
DALI / LEDset
Programmable features
Operating Current
Yes
Lamp Operating Time
Yes
Driver Guard
No
DALI Settings
Yes
Emergency Mode
Yes
DALI-2 Luminaire Data
Yes
Configuration Lock
No
Soft Switch Off
Yes
Dim to Dark
No
TouchDIM + Sensor
Yes
Corridor Functionality
Yes
OEM Key
Yes
Certificates & standards
Approval marks approval
ENEC 10 / VDE / EMC / EL / CE / DALI-2
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
12-05-2023
Primary Article Identifier
4052899488168
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
ef386587-888a-4ecb-97c0-d615a42f9032
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899488168 |
UNV
| 1 | 67mm x 30mm x 103mm | 149.00g | 0.20dm³ |
4052899488175 |
VS
| 20 | 357mm x 222mm x 96mm | 3231.00g | 7.61dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
This Compact LED Driver is fully digitally programmable by DALI and LT2 and includes 1 100% dimming. The very wide operating window and an optional cable clamp for independent installation and through-looping allow some flexibility in its usage.
- Supply voltage: 220 240 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Line voltage: 198 264 V
- Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
- RI suppression: to EN 55015/CISPR 15
- Line harmonics according to EN 61000-3-2
- Immunity according to EN 61547
- Lifetime: up to 100,000 h
- Type of protection: IP20
- Independent connection via through-looping (except OTi DALI 15)
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
OTi DALI 15/220
240/1A0 LT2
|
7.5 54 V | 150 1050 mA | 95.0 mm | 53.0 mm | 30.0 mm | ||
![]() |
OTi DALI 25/220
240/700 LT2
|
12 54 V | 180 700 mA | 103.0 mm | 67.0 mm | 29.5 mm | ||
![]() |
OTi DALI 35/220
240/1A0 LT2
|
15 54 V | 350 1050 mA | 103.0 mm | 67.0 mm | 29.5 mm | ||
![]() |
OTi DALI 50/220
240/1A4 LT2 FAN
|
15 54 V | 600 1400 mA | 110.0 mm | 75.0 mm | 25.0 mm |