OTi DALI 35/220...240/1A0 NFC L
- Fully programmable via software (DALI Interface, NFC)
- Advanced luminaire/driver data (power, energy, operating hours ) for analytics
- DALI-2 certified incl. Parts 251, 252, 253
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- High-quality dimming of 1 100 % by amplitude dimming
- Higher quality of light thanks to < 3% output ripple current
- Very high efficiency
- Very low standby power consumption: < 0.15 W *
- Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
- Linear lighting for office, education, industry, storage areas and retail
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220 240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198 264 V
Input voltage DC
176 276 V
Current set
DALI / NFC / Programmable
Total harmonic distortion
≤ 10 %
Power factor λ
0.61C 0.98
Efficiency in full-load
89 %
Device power loss
3.0 W
Inrush current
≤ 20 A
Max. ECG no. on circuit breaker 10 A (B)
14
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
24
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
15 54 V
U-OUT (working voltage)
< 60 V
Nominal output current
200 1050 mA
Default output current
350 mA
Output current tolerance
±3 %
Output ripple current (100 Hz)
≤ 3 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
4 37 W
Maximum output power
37 W
Galvanic isolation
SELV
Power loss in stand-by mode
≤0.15 W
Dimensions & weight
Mounting hole spacing, length
270.0 mm
Product weight
209.00 g
Cable cross-section, input side
0.5 1.5 mm²
Cable cross-section, output side
0.5 1.5 mm²
Wire preparation length, input side
8.0 9.0 mm
Wire preparation length, output side
8.0 9.0 mm
Height
21.0 mm
Width
30.0 mm
Length
280.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25 +60 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40 +85 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
100000 / 50000 h
Additional product data
Encapsulated
No
Capabilities
Programming interface
DALI, NFC
Dimmable
Yes
Dimming interface
DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range
1 100 %
Dimming method
Full analogue dimming
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Suitable for emergency lighting
Yes
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
DALI-2 Diagnostic Data
Yes
Constant lumen function
Programmable
Control interface
DALI
Number of channels
1
DALI-2 Energy Data
Yes
Programming
Programming device
DALI magic / NFC Scanner
Tuner4TRONIC
Yes
Tuner4TRONIC Field App
Yes
Box programming
Yes
Programmable features
DALI-2 Luminaire Data
Yes
TouchDIM + Sensor
Yes
Certificates & standards
Approval marks approval
CE / EL / VDE-ENEC / EAC / CCC / BIS / RCM
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61347
Type of protection
IP20
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-04-2023
Primary Article Identifier
4062172074964
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
b69841e5-6d04-44fe-9877-8bb334af0e7a
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172074964 |
UNV
| 1 | 209.00g | ||
4062172074971 |
VS
| 20 | 303mm x 159mm x 105mm | 4307.00g | 5.06dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Versatile DALI window driver up to 50 W due to flexible output characteristic
- Supply voltage: 220 240 V
- Available with output current range: up to 1,400 mA
- Constant Lumen Output (CLO)
- Integrated customizable thermal management (Driver Guard)
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
OTi DALI 25/220...240/700 NFC L
|
15 54 V | 100 700 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
![]() |
OTi DALI 35/220...240/1A0 NFC L
|
15 54 V | 200 1050 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
![]() |
OTi DALI 50/220...240/1A4 NFC L
|
15 54 V | 400...1400 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
![]() |
OTi DALI 80/220
240/2A1 NFC L
|
20 54 V | 600 2100 mA | 360.0 mm | 30.0 mm | 21.0 mm |