OTi DALI 35/220 240/1A0 NFC
- Versatile DALI window driver due to flexible output characteristic
- Locking and unlocking of luminaire/driver data
- Advanced luminaire/driver data (power, energy, operating hours ) for analytics
- DALI-2 certified incl. Parts 251, 252, 253
- Easy and fast output current setting via NFC
- Very high efficiency
- High-quality dimming of 1 100 % by amplitude dimming
- Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
- Feedback of power consumption and operating hours (Fit for SMART GRID)
- Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for use in luminaires with flexible current setting
- Suitable for indoor SELV installations
- Suitable for luminaires of protection classes I and II
- Suitable for downlights, spotlights and LED panels
- Installation via Cable Clamp Kit possible (depending on version of product)
Technical Data
Electrical data
Nominal input voltage
220 240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198 264 V
Input voltage DC
176 276 V
Total harmonic distortion
< 10 %
Power factor λ
0.56C...0.98
Efficiency in full-load
90 %
Device power loss
-
Inrush current
15 A
Max. ECG no. on circuit breaker 10 A (B)
18
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
28
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
15 54 V
U-OUT (working voltage)
60 V
Nominal output current
350 1050 mA
Default output current
700 mA
Output current tolerance
±3 %
Output ripple current (100 Hz)
< 3 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
35 W
Maximum output power
35 W
Power loss in stand-by mode
0.1 W
Galvanic isolation DALI/mains
SELV
Galvanic isolation DALI/output
SELV
Galvanic isolation primary/secondary
SELV
Networked standby power
≤0.10 W
Current set
DALI / NFC
Dimensions & weight
Mounting hole spacing, length
94.0 mm
Mounting hole spacing, width
58.0 mm
Product weight
145.00 g
Cable cross-section, input side
0.2 1.5 mm²
Cable cross-section, output side
0.2 1.5 mm²
Wire preparation length, input side
8.0 9.0 mm
Wire preparation length, output side
8.0 9.0 mm
Height
29.5 mm
Width
67.0 mm
Length
103.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20 +50 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40 +85 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
50000 / 100000 h
Additional product data
Encapsulated
No
Predecessor EAN
4052899548237
Capabilities
Dimmable
Yes
Dimming interface
DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range
1 100 %
Dimming method
Amplitude Modulation
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
DALI-2 Diagnostic Data
Yes
Number of channels
1
Suitable for emergency lighting
Yes
Programming interface
DALI, NFC
Suitable for through-wiring
Yes with optional cable clamp
Control interface
DALI-2
DALI-2 Energy Data
Yes
Constant lumen function
Programmable
Programming
Programming device
DALI / NFC
Tuner4TRONIC
Yes
Tuner4TRONIC Field App
Yes
Box programming
Yes
Programmable features
Corridor Functionality
Yes
Operating Current
Yes
Constant Lumen
Yes
Lamp Operating Time
Yes
Driver Guard
Yes
DALI Settings
Yes
Emergency Mode
Yes
DALI-2 Luminaire Data
Yes
Configuration Lock
Yes
Soft Switch Off
Yes
Dim to Dark
Yes
TouchDIM + Sensor
Yes
OEM Key
No
Certificates & standards
Approval marks approval
CE / EL / ENEC 10 / VDE / VDE-EMC / DALI-2 / EAC / MM
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
25-10-2023
Primary Article Identifier
4062172017923
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
e84f2d4e-a1d0-441f-838c-49ec83b67ed9
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172017923 |
UNV
| 1 | 167.00g | ||
4062172017930 |
VS
| 20 | 357mm x 222mm x 96mm | 3225.00g | 7.61dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
This Compact LED Driver is fully digitally programmable by DALI and NFC and ready for the new DiiA standards: 251, 252 and 253. The very wide operating window and an optional cable clamp for independent installation and through-looping allow some flexibility in its usage.
- Supply voltage: 220 240 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Line voltage: 198 264 V
- According to EN 61347-1, 61347-2-13, 62384
- RI suppression: to EN 55015/CISPR 15
- Immunity according to EN 61547
- Lifetime: up to 100,000 h
- Type of protection: IP20
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
OTi DALI 15/220...240/1A0 NFC
|
7.5 54 V | 150 1050 mA | 95.0 mm | 53.0 mm | 30.0 mm | ||
![]() |
OTi DALI 25/220
240/700 NFC
|
15 54 V | 180 700 mA | 103.0 mm | 67.0 mm | 29.5 mm | ||
![]() |
OTi DALI 35/220
240/1A0 NFC
|
15 54 V | 350 1050 mA | 103.0 mm | 67.0 mm | 29.5 mm | ||
![]() |
OTi DALI 50/220...240/1A4 NFC
|
15 54 V | 600 1400 mA | 110.0 mm | 75.0 mm | 25.0 mm |