OTI DX 75/220…240/600 D NFC L
.jpg)
.jpg)
Product family benefits
- Versatile non-isolated DEXAL LED driver up to 75 W due to flexible output characteristic
- Integrated DEXAL Bus power supply for sensors and wireless radios
- Simplified luminaire design for wireless lighting control system and sensors
- Locking and unlocking of luminaire/driver data
- Advanced luminaire/driver data (power, energy, operating hours…) for analytics
- Prepared for DiiA Specification Parts -250, -251, -252 and -253
- Fully programmable via T4T software (NFC, DALI Interface)
- Very high efficiency
- Protection against 4 kV burst and 1.5 kV surge voltage (L-N)
- Wide operating range up to 600 mA
Areas of application
- Linear lighting for office, education, industry, storage areas and retail
- DEXAL, easy connection to different partner BMS systems
- Suitable for "Works with OSRAM DEXAL" partner components
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Current set
DALI / NFC / LEDset / Programmable
Total harmonic distortion
< 10 %
Power factor λ
0.46C…0.98
Efficiency in full-load
93 %
Device power loss
5.25 W
Inrush current
27 A
Max. ECG no. on circuit breaker 10 A (B)
15
Max. ECG no. on circuit breaker 16 A (B)
24
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1.5 kV
Nominal output voltage
54…240 V
U-OUT (working voltage)
< 250 V
Nominal output current
120…600 mA
Default output current
60 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
< 4 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
6.5…75 W
Maximum output power
75 W
Galvanic isolation
Non isolated
DEXAL Peak Supply Current
60 mA
Power loss in stand-by mode
<0.25 W
DEXAL Supply Voltage
15 V
DEXAL Guaranteed Supply Current
53 mA
Dimensions & weight
Mounting hole spacing, length
350.0 mm
Product weight
243.00 g
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
8.0…9.0 mm
Wire preparation length, output side
8.0…9.0 mm
Length
360.0 mm
Width
30.0 mm
Height
21.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+55 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 100000 h
ECG ambient temperature (ta) |
55 °C |
45 °C |
|---|---|---|
Temperature at the measuring point tc (°C) |
75 °C |
65 °C |
ECG lifespan (h) |
50000 h |
100000 h |
Additional product data
Encapsulated
No
Capabilities
Programming interface
DEXAL, NFC, LEDset
Dimmable
Yes
Dimming interface
DALI-2 / DEXAL
Dimming range
1…100 %
Dimming method
Full analogue dimming
Overheating protection
Automatic reversible
Overload protection
Non-reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Suitable for emergency lighting
Yes
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
Control interface
DEXAL
Constant lumen function
Programmable
Number of channels
1
DALI-2 Diagnostic Data
Yes
DALI-2 Energy Data
Yes
Programming
Programming device
DALI magic / NFC Scanner
Tuner4TRONIC
Yes
Tuner4TRONIC Field App
Yes
Box programming
Yes
Programmable features
Constant Lumen
Yes
Operating Current
Yes
Driver Guard
Yes
Soft Switch Off
Yes
Dim to Dark
Yes
TouchDIM + Sensor
Yes
DEXAL Power Supply Unit
Yes
Emergency Mode
Yes
DALI-2 Luminaire Data
Yes
Lamp Operating Time
Yes
Certificates & standards
Approval marks – approval
CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / BIS / RCM
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
20-11-2023
Primary Article Identifier
4052899590403
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
62c5caf0-ea2e-4828-bb8c-cd92a8441e8e
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899590403 |
UNV
| 1 | 360mm x 30mm x 21mm | 243.00g | 0.23dm³ |
| 4052899590410 |
VS
| 20 | 385mm x 160mm x 100mm | 5034.00g | 6.16dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Future proof – ready for wireless applications.
This product is industry ready thanks to a high surge / burst (up to 4kV) and a low standby. For luminaire info and monitoring data the DiiA standards -251, -252, and -253 are integrated and the device is fully digitally programmable by DALI, NFC and LT2. It’s also possible to select AM or AM/PWM dimming.
This product is industry ready thanks to a high surge / burst (up to 4kV) and a low standby. For luminaire info and monitoring data the DiiA standards -251, -252, and -253 are integrated and the device is fully digitally programmable by DALI, NFC and LT2. It’s also possible to select AM or AM/PWM dimming.
Product family features
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Supply voltage: 220…240 V
- Constant Lumen Output (CLO)
- Monitoring of luminaire operating parameters
- Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
OTI DX 35/220…240/400 D NFC L
|
54…240 V | 75…400 mA | 360.0 mm | 30.0 mm | 21.0 mm | ||
|
|
OTI DX 75/220…240/600 D NFC L
|
54…240 V | 120…600 mA | 360.0 mm | 30.0 mm | 21.0 mm |