OTi QBM 30/220...240/700 NFC I
- Versatile QBM window driver due to flexible output characteristic
- Locking and unlocking of programmable features
- Easy and fast output current setting via NFC
- Very high efficiency
- High-quality dimming of 1 100 % by amplitude dimming
- Suitable for downlights, spotlights and LED panels
- Suitable for use in luminaires with flexible current setting
- Suitable for indoor SELV installations
- Suitable for luminaires of protection classes I and II
Technical Data
Electrical data
Nominal input voltage
220 240 V
Mains frequency
0,50,60 Hz
Input voltage AC
198 264 V
Input voltage DC
176 276 V
Total harmonic distortion
< 10 %
Power factor λ
≥ 0.95
Efficiency in full-load
90 %
Inrush current
< 20 A
Max. ECG no. on circuit breaker 10 A (B)
20
Max. ECG no. on circuit breaker 16 A (B)
30
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
20 50 V
U-OUT (working voltage)
60 V
Nominal output current
350 700 mA
Default output current
500 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
30 W
Maximum output power
30 W
Current set
NFC
Radio frequency
2.4 GHz
Maximum TX power
+4 dBm
Wireless protocol
Qualified Bluetooth mesh enabled by Silvair
Wireless range
10 m line of sight
Networked standby power
<0.22 W
Power loss in stand-by mode
<0.15 W
Galvanic isolation primary/secondary
SELV
Dimensions & weight
Mounting hole spacing, length
186.5 mm
Product weight
160.00 g
Cable cross-section, input side
0.75 2.5 mm²
Cable cross-section, output side
0.5 1.5 mm²
Wire preparation length, input side
6.0 mm
Wire preparation length, output side
7 8 mm
Length
204.0 mm
Height
32.0 mm
Width
50.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20 +50 °C
Permitted rel. humidity during operation
5 85 %
Temperature range at storage
-25 85 °C
Max.housing temperature in case of fault
110 °C
Maximum temperature at tc test point
80 °C
Lifespan
ECG lifetime
50000 / 100000 h
Additional product data
Encapsulated
No
Capabilities
Dimmable
Yes
Dimming interface
Qualified Bluetooth mesh by Silvair
Dimming range
1 100 %
Dimming method
Amplitude Modulation
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, input side
Screw terminal
Type of connection, output side
Push terminal
Number of channels
1
DALI-2 Diagnostic Data
No
Suitable for emergency lighting
Yes
Suitable for through-wiring
Yes
Constant lumen function
Programmable
Programming interface
NFC
Reset
Manual
Control interface
qualified Bluetooth mesh
DALI-2 Energy Data
No
Programming
Tuner4TRONIC
Yes
Box programming
Yes
Programming device
NFC
Tuner4TRONIC Field App
Yes
Programmable features
Emergency Mode
Yes
Driver Guard
Yes
Soft Switch Off
Yes
Dim to Dark
Yes
OEM Key
No
Configuration Lock
Yes
Certificates & standards
Approval marks approval
CE / EL / EAC
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62479/Acc. to ETSI EN 300 328/Acc. to ETSI EN 301 489-17/Acc. to ETSI EN 301 489 - 1
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
850440959000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
18-10-2022
Primary Article Identifier
4062172115049
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
53fdf505-2f9c-4e08-8a16-1393bcfb6b63
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172115049 |
UNV
| 1 | 204mm x 50mm x 32mm | 160.00g | 0.33dm³ |
4062172115056 |
VS
| 20 | 428mm x 173mm x 121mm | 3467.00g | 8.96dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
The main benefit of this driver is the qualified Bluetooth mesh that was enabled by Silvair and works with OSRAM HubSense. Further highlights include 1 100% dimming and a wide operating window. An independent version with cable clamps, screw terminals on the primary side and through-looping is also available.
- Qualified Bluetooth mesh enabled by Silvair
- Works with OSRAM Hubsense
- Cable clamp housing for independent mounting
- Through-looping
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
OTi QBM 30/220...240/700 NFC I
|
20 50 V | 350 700 mA | 204.0 mm | 50.0 mm | 32.0 mm | ||
![]() |
OTi QBM 40/220...240/1A0 NFC I
|
20 50 V | 500 1050 mA | 204.0 mm | 50.0 mm | 32.0 mm |