OPTOTRONIC Intelligent Flat – DALI (non-isolated)

Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 75 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Available with output current range: up to 500 mA
  • DALI-2 certified (Part -101,-102 and -207)
  • Monitoring of luminaire operating parameters
  • Constant Lumen Output (CLO)
  • Non-isolated drivers
Product family benefits
  • Flat housing (16 mm height) for innovative luminaire designs and applications
  • Fully programmable via software (DALI Interface, NFC)
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • Prepared for DiiA Specification Parts -251, -252 and -253
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
  • Higher quality of light thanks to < 1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 25/220…240/300 D NFC FL
54…240 V 35…300 mA 280.0 mm 30.0 mm 16.0 mm
OTi DALI 35/220…240/400 D NFC FL
54…240 V 75…400 mA 280.0 mm 30.0 mm 16.0 mm
OTi DALI 75/220…240/500 D NFC FL
54…240 V 120…500 mA 280.0 mm 30.0 mm 16.0 mm

Information about Family

Future proof – enable innovative luminaires design with latest technology

Some special features of this product include advanced luminaire/driver data for analytics, SelectDIM (AM/PWM) by Tuner4TRONIC and the opportunity for DiiA Specification Parts -251, -252 and -253. The drivers are also fully digitally programmable by DALI and NFC and offer a high lighting quality due to low ripple.
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now