OTi DALI 25/220…240/300 D NFC FL
Product family benefits
- Flat housing (16 mm height) for innovative luminaire designs and applications
- Fully programmable via software (DALI Interface, NFC)
- Advanced luminaire/driver data (power, energy, operating hours…) for analytics
- Prepared for DiiA Specification Parts -251, -252 and -253
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
- Higher quality of light thanks to < 1% output ripple current
- Very high efficiency
- Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
- Linear lighting for office, education, industry, storage areas and retail
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Current set
DALI / NFC / Programmable
Total harmonic distortion
9.50 %
Power factor λ
0.30C…0.95
Efficiency in full-load
90.5 %
Device power loss
2.0 W
Protective conductor current
<0.5 mA
Inrush current
21 A
Max. ECG no. on circuit breaker 10 A (B)
17
Max. ECG no. on circuit breaker 16 A (B)
28
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
54…240 V
U-OUT (working voltage)
< 250 V
Nominal output current
35…300 mA
Default output current
35 mA
Output current tolerance
±3 %
Output ripple current (100 Hz)
< 1 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
2.7…25 W
Maximum output power
25 W
Galvanic isolation
Non isolated
Power loss in stand-by mode
<0.15 W
Dimensions & weight
Mounting hole spacing, length
270.0 mm
Product weight
205.00 g
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
8.0…9.0 mm
Wire preparation length, output side
8.0…9.0 mm
Length
280.0 mm
Height
16.0 mm
Width
30.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+60 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 100000 h
Capabilities
Programming interface
DALI, NFC
Dimmable
Yes
Dimming interface
DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range
0.1…100 %
Dimming method
Full analogue dimming / AM/PWM selectable
Constant lumen function
Programmable
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
Number of channels
1
DALI-2 Diagnostic Data
Yes
DALI-2 Energy Data
Yes
Control interface
DALI
Programming
Programming device
DALI magic / NFC Scanner
Tuner4TRONIC Field App
Yes
Box programming
Yes
Programmable features
DALI-2 Luminaire Data
Yes
Certificates & standards
Approval marks – approval
CE / EL / VDE-ENEC / EAC / CCC / RCM / BIS
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection
IP20
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
06-02-2023
Primary Article Identifier
4062172020749
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
23742d2b-38b2-44b3-8c6c-5a6b83386b3b
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172020749 |
UNV
| 1 | |||
| 4062172020756 |
VS
| 20 | 300mm x 128mm x 106mm | 4223.00g | 4.07dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Future proof – enable innovative luminaires design with latest technology
Some special features of this product include advanced luminaire/driver data for analytics, SelectDIM (AM/PWM) by Tuner4TRONIC and the opportunity for DiiA Specification Parts -251, -252 and -253. The drivers are also fully digitally programmable by DALI and NFC and offer a high lighting quality due to low ripple.
Some special features of this product include advanced luminaire/driver data for analytics, SelectDIM (AM/PWM) by Tuner4TRONIC and the opportunity for DiiA Specification Parts -251, -252 and -253. The drivers are also fully digitally programmable by DALI and NFC and offer a high lighting quality due to low ripple.
Product family features
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Versatile DALI window driver up to 75 W due to flexible output characteristic
- Supply voltage: 220…240 V
- Available with output current range: up to 500 mA
- DALI-2 certified (Part -101,-102 and -207)
- Monitoring of luminaire operating parameters
- Constant Lumen Output (CLO)
- Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
OTi DALI 25/220…240/300 D NFC FL
|
54…240 V | 35…300 mA | 280.0 mm | 30.0 mm | 16.0 mm | ||
|
OTi DALI 35/220…240/400 D NFC FL
|
54…240 V | 75…400 mA | 280.0 mm | 30.0 mm | 16.0 mm | ||
|
OTi DALI 75/220…240/500 D NFC FL
|
54…240 V | 120…500 mA | 280.0 mm | 30.0 mm | 16.0 mm |
