OTi DALI 100/220…240/700 D NFC IND L

Product family benefits
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
  • High light quality: 1…100% amplitude dimming and <1% output ripple current
  • Wide operating temperature range: -40…+65 °C
  • High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
  • Integrated inrush current limiter
  • Very high efficiency (up to 96%)
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
Areas of application
  • Linear lighting solutions for industry, storage areas and retail applications
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

DALI / NFC / LEDset / Programmable

Total harmonic distortion

< 8 %

Power factor λ

> 0.98

Efficiency in full-load

94 %

at 230 V, 50 Hz

Device power loss

9.0 W

Networked standby power

≤ 0.22 W

at 230 V, 50 Hz

Inrush current

5 A

Max. ECG no. on circuit breaker 10 A (C)

-

Max. ECG no. on circuit breaker 10 A (B)

23

Max. ECG no. on circuit breaker 16 A (C)

-

Max. ECG no. on circuit breaker 16 A (B)

36

Surge capability (L/N-Ground)

4 kV

Surge capability (L-N)

4 kV

Nominal output voltage

64…300 V

U-OUT (working voltage)

< 310 V

Nominal output current

200…700 mA

Output current LEDset open

100 mA

Output current LEDset shorted

200 mA

Default output current

100 mA

LEDset deactivated

Output current tolerance

±3 %

When use DALI

Output ripple current (100 Hz)

< 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

28…100 W

Maximum output power

100 W

Galvanic isolation

Non isolated

Dimensions & weight

Mounting hole spacing, length

350.0 mm

Product weight

260.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

360.0 mm

Height

21.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-40…+65 °C

Maximum temperature at tc test point

85 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 85°C / 10% failure rate / At Tcase = 75°C at Tc point / 10% failure rate

Additional product data

Encapsulated

No

Capabilities

Programming interface

DALI, NFC, LEDset

Dimmable

Yes

Dimming interface

DALI-2 / Touch DIM / Touch DIM Sensor

Dimming range

1…100 %

Dimming method

Full analogue dimming

Constant lumen function

Programmable

Overheating protection

Automatic reversible

Overload protection

Non-reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

5.0 m

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Number of channels

1

DALI-2 Diagnostic Data

Yes

DALI-2 Energy Data

Yes

Control interface

DALI

Programming

Programming device

DALI magic / NFC Scanner

Tuner4TRONIC

Yes

Tuner4TRONIC Field App

Yes

Box programming

Yes

Programmable features

Operating Current

Yes

Constant Lumen

Yes

Lamp Operating Time

Yes

Driver Guard

Yes

DALI Settings

Yes

Emergency Mode

Yes

DALI-2 Luminaire Data

Yes

Soft Switch Off

Yes

Dim to Dark

Yes

TouchDIM + Sensor

Yes

Corridor Functionality

Yes

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / EAC / CCC / RCM / BIS

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386

Type of protection

IP20

Logistical data

Commodity code

850440829000

Environmental information

Date of Declaration

10-11-2021

Primary Article Identifier

4052899559516

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

1a2a2563-fa7e-405d-8d4a-1f291bbf4f04

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899559516 UNV

Unpacked

1 360mm x 30mm x 21mm 260.00g 0.23dm³
4052899559523 VS

Shipping box

20 385mm x 160mm x 100mm 5546.00g 6.16dm³

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now

Information about Family

Future proof – ready for intelligent, efficient and robust industry solutions

For luminaire info and monitoring data the DiiA standards -251, -252 and -253 are integrated and the device also shows an integrated inrush current limiter. It is fully programmable by DALI, NFC and LT2 and a low LF and HF ripple help to avoid machine disturbances.
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application thanks to an output power range of up to 300 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 1,000 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • Non-isolated drivers
  • DALI-2 certified (Part -101,-102 and -207)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 75/220...240/550 D NFC IND L
64…300 V 125…550 mA 360.0 mm 30.0 mm 21.0 mm
OTi DALI 100/220…240/700 D NFC IND L
64…300 V 200…700 mA 360.0 mm 30.0 mm 21.0 mm
OTi DALI 150/220…240/1A0 D NFC IND L
64…300 V 250…1000 mA 425.0 mm 30.0 mm 21.0 mm
OTi DALI 300/220...240/1A6 D NFC IND L
60…300 V 250...1550 mA 360.0 mm 45.0 mm 28.0 mm