OTI DX 100/220...240/700 D NFC IND L

Product family benefits
  • Versatile non-isolated DEXAL LED driver up to 150 W due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • Prepared for DiiA Specification Parts -250, -251, -252 and -253
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
  • High light quality: 1…100% amplitude dimming and <1% output ripple current
  • Wide operating temperature range: -40…+65 °C
  • High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
  • Integrated inrush current limiter
  • Very high efficiency (up to 96%)
Areas of application
  • Linear and area lighting
  • Industry lighting
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

NFC / LEDset / Programmable

Total harmonic distortion

< 10 %

Power factor λ

0.57C…0.98

Efficiency in full-load

93 %

at 230 V, 50 Hz

Device power loss

2.0 W

Inrush current

≤ 5 A

Max. ECG no. on circuit breaker 10 A (B)

20

Max. ECG no. on circuit breaker 10 A (C)

-

Max. ECG no. on circuit breaker 16 A (C)

-

Max. ECG no. on circuit breaker 16 A (B)

32

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

4 kV

Surge capability (L-N)

4 kV

Nominal output voltage

64…300 V

U-OUT (working voltage)

< 310 V

Nominal output current

200…700 mA

Output current LEDset open

100 mA

Output current LEDset shorted

200 mA

Default output current

100 mA

LEDset deactivated

Output current tolerance

±3 %

Output ripple current (100 Hz)

< 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

23…100 W

Maximum output power

100 W

Galvanic isolation

Non isolated

DEXAL Peak Supply Current

60 mA

DEXAL Supply Voltage

15 V

DEXAL Guaranteed Supply Current

53 mA

Power loss in stand-by mode

<0.25 W

Dimensions & weight

Mounting hole spacing, length

414.0 mm

Product weight

311.13 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Width

30.0 mm

Height

21.0 mm

Length

425.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-40…+70 °C

Maximum temperature at tc test point

85 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

100000 / 50000 h

Additional product data

Encapsulated

No

Capabilities

Programming interface

DEXAL, NFC, LEDset

Dimmable

Yes

Dimming interface

DALI-2 / DEXAL

Dimming range

1…100 %

Dimming method

Full analogue dimming / AM/PWM selectable

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

DALI-2 Energy Data

Yes

DALI-2 Diagnostic Data

Yes

Control interface

DEXAL

Constant lumen function

Programmable

Number of channels

1

Programming

Programming device

DALI magic / NFC Scanner

Tuner4TRONIC

Yes

Tuner4TRONIC Field App

Yes

Box programming

Yes

Programmable features

DALI-2 Luminaire Data

Yes

DEXAL Power Supply Unit

Yes

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / BIS / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

20-11-2023

Primary Article Identifier

4062172050883

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

138efd98-9890-461a-92c7-9259550af640

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172050883 UNV

Unpacked

1 425mm x 30mm x 21mm 311.00g 0.27dm³
4062172050890 VS

Shipping box

20 447mm x 160mm x 101mm 6421.00g 7.22dm³

Downloads

Accessories optional

Information about Family

Future proof – ready for intelligent, efficient and robust industry solutions.

The DEXAL Interface and the DiiA -250 as well as an integrated DiiA -251, -252, -253 for luminaire info and monitoring data present one key characteristic of this LED Driver. Additionally the module is fully digitally programmable by DALI, NFC and LT2 and contains very wide operating windows up to 600mA.
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 150 W
  • Monitoring of luminaire operating parameters
  • Supply voltage: 220…240 V
  • Available with output current range: up to 850 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTI DX 100/220...240/700 D NFC IND L
64…300 V 200…700 mA 425.0 mm 30.0 mm 21.0 mm
OTI DX 150/220...240/850 D NFC IND L
64…300 V 250…850 mA 425.0 mm 30.0 mm 21.0 mm