OTi DALI 75/220…240/700 D NFC TW L

Product family benefits
  • Control of standard white or Tunable White light acc. DALI device type 8 (DT8)*
  • TouchDIM Tunable White integrated for use without additional LMS
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
Areas of application
  • For Tunable White as well as for 2-channel use (e.g. direct/indirect lighting)
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
  • Perfect system match with PrevaLED Linear Tunable White

Legal advice
* The “DALI colour control functionality (part 209 / Device Type 8)" of this product has not been verified by the DiiA.

German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

DALI / NFC / Programmable

Total harmonic distortion

< 10 %

Power factor λ

> 0.95

Efficiency in full-load

91 %

at 230 V, 50 Hz

Device power loss

6.0 W

Networked standby power [GMS]

<0.20 W

at 230 V, 50 Hz

Inrush current

23 A

Max. ECG no. on circuit breaker 10 A (B)

13

Max. ECG no. on circuit breaker 16 A (B)

19

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

50…240 V

U-OUT (working voltage)

< 250 V

Nominal output current

150…700 mA

Default output current

150 mA

Output current tolerance

±3 %

Output ripple current (100 Hz)

< 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

8.1…75 W

Maximum output power

75 W

Galvanic isolation

Non isolated

Dimensions & weight

Mounting hole spacing, length

350.0 mm

Product weight

260.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

360.0 mm

Width

30.0 mm

Height

21.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

Additional product data

Encapsulated

No

Capabilities

Programming interface

DALI, NFC

Dimmable

Yes

Dimming interface

DALI-2 / Touch DIM / Touch DIM Sensor

Dimming range

1…100 %

Dimming method

Full analogue dimming / AM/PWM selectable

Constant lumen function

Programmable

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Number of channels

2

DALI-2 Energy Data

No

DALI-2 Diagnostic Data

No

Control interface

DALI

Programming

Programming device

DALI magic / NFC Scanner

Tuner4TRONIC

Yes

Tuner4TRONIC Field App

No

Box programming

Yes

Programmable features

Operating Current

Yes

Lamp Operating Time

Yes

Driver Guard

Yes

DALI Settings

Yes

Emergency Mode

Yes

DALI-2 Luminaire Data

No

Soft Switch Off

Yes

Dim to Dark

Yes

TouchDIM + Sensor

Yes

Corridor Functionality

Yes

Tunable White CCT

Yes

Tunable White High precision

Yes

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / EAC / CCC / RCM / BIS

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

850440829000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

14-04-2022

Primary Article Identifier

4052899990326 | 4050732460562

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

93be4835-5632-4a51-a298-37de2cd41efa | 681f9420-9c43-48ed-92c1-43b19db7740f

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899990326 UNV

Unpacked

1 170.00g
4052899990333 VS

Shipping box

20 385mm x 160mm x 100mm 5374.00g 6.16dm³

Downloads

Accessories optional

Information about Family

Peace of mind – easy, multi-usable, affordable

Selectable AM or AM/PWM dimming and 3 selectable lighting quality levels are provided by Tuner4TRONIC for this device. A TW TouchDIM is also integrated which allows dimming and changing of color temperature without LMS. The driver also combines DT8 and 2xDT6 in one device.
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 75 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Usable as DT6 (2-channel) or DT8 (Tunable White) driver*
  • Available with output current range: up to 700 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 35/220…240/400 D NFC TW L
45…240 V 75…400 mA 360.0 mm 30.0 mm 21.0 mm
OTi DALI 75/220…240/700 D NFC TW L
50…240 V 150…700 mA 360.0 mm 30.0 mm 21.0 mm