OT 100/220…240/4A2 P5

Product family benefits
  • High surge protection: up to 6 kV
  • High efficiency
  • Adjustable and wide output current range
  • Constant current output
  • Protection through double isolation between primary and secondary side (SELV)
  • IP rating: IP65
  • Long lifetime: up to 100,000 h
Areas of application
  • Independent installation
  • Street and urban lighting
  • Industry
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal voltage

220…240 V

Input voltage AC

198…264 V

Permitted voltage range

Nominal current

0.52 A

Mains frequency

50…60 Hz

Power factor λ

> 0.99/> 0.90

Full load at 220…240 VAC/50 Hz/Half load at 220…240 VAC/50 Hz

Total harmonic distortion

< 10 %

Device power loss

14 W

Inrush current

50 A

Max. ECG no. on circuit breaker 10 A (B)

5

Max. ECG no. on circuit breaker 16 A (B)

8

Max. ECG no. on circuit breaker 25 A (B)

13

Surge capability (L/N-Ground)

6 kV

Surge capability (L-N)

6 kV

Nominal output power

100 W

Partial load 51…100 W

Maximum output power

100 W

Efficiency in full-load

88 %

at 230 V, 50 Hz

Nominal output voltage

24…48 V

U-OUT (working voltage)

60 V

Nominal output current

2100…4200 mA

±5%

Output current tolerance

±5 %

Minimum output current

1 A

Galvanic isolation

double/reinforced

Dimensions & weight

Length

212.5 mm

Width

68.0 mm

Height

42.5 mm

Mounting hole spacing, length

201.6 mm

Product weight

1000.00 g

Cable cross-section, input side

1.0 mm²

Cable cross-section, output side

1.0 mm²

Wire preparation length, input side

10 mm

Temperatures & operating conditions

Ambient temperature range

-40…+55 °C

Temperature range at storage

-40…+85 °C

Maximum temperature at tc test point

85 °C

Max.housing temperature in case of fault

110 °C

Lifespan

ECG lifetime

50000 h

At maximum Tc = 80°C / 10% failure rate

Temperature at the measuring point tc (°C)

80 °C

70 °C

ECG lifespan (h)

50000 h

Max. 10% failure rate at tc max

80000 h

Max. 10% failure rate at tc max

Capabilities

Dimmable

No

Suitable for fixtures with prot. class

I

Intended for no-load operation

No

Number of channels

1

Certificates & standards

Type of protection

IP65

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384

Approval marks – approval

CCC / CE / CB

Logistical data

Commodity code

850440829000

Environmental information

Date of Declaration

10-11-2021

Primary Article Identifier

4052899410657

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

6b56cf60-e89c-40bb-b1d5-61198d00525d

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899410657 UNV

Unpacked

1
4052899410664 VS

Shipping box

10 292mm x 282mm x 212mm 10783.00g 17.46dm³

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now

Information about Family

OPTOTRONIC Outdoor is a constant current LED power supply that offers an extensive lifespan and overtemperature protection. You can choose your preferred option from a range of wattages; the line voltage is 220…240 V. It permits current setting via potentiometer without programming, and is suitable for use with luminaires of protection class I. You can install this driver independently, and it is great for use in street lighting, urban and industrial lighting. Its benefits include high surge protection (up to 6 kV), an adjustable and wide output current range, protection given by double isolation between the primary and secondary sides (SELV) and high IP protection (IP65).
Product family features
  • Overtemperature protection
  • Available with different wattage: 100 W, 150 W, 200 W
  • Line voltage: 220…240 V
  • Current setting via potentiometer without programming
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT 100/220…240/4A2 P5
24…48 V 2100…4200 mA 212.5 mm 68.0 mm 42.5 mm
OT 150/220…240/4A9 P5
30…60 V 2450…4900 mA 242.5 mm 68.0 mm 42.5 mm
OT 200/220…240/5A6 P5
35…70 V 2800…5600 mA 252.5 mm 68.0 mm 42.5 mm