OPTOTRONIC Phase-cut OT FIT

Product family features
  • Cable clamp housing for independent mounting
  • Dimmable on the leading edge and trailing edge
  • Housing for independent installation
Product family benefits
  • Compatible with the most common leading-edge and trailing-edge phase dimmers
  • Flexible current setting (DIPswitch – 2 to 4 currents)
  • Flicker-free dimming
  • Higher quality of light thanks to < 5% output ripple current
  • Housing from 80% recycled plastic

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 7/220...240/180 CS PC
27…40 V 100 / 120 / 155 / 180 mA 130.0 mm 30.0 mm 22.2 mm
OT FIT 8/220...240/180 CS PC
27…40 V 100 / 120 / 155 / 180 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 8/220...240/180 CS PC SC
27…40 V 100 / 120 / 155 / 180 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 14/220...240/350 CS PC
27…40 V 200 / 250 / 300 / 350 mA 130.0 mm 30.0 mm 22.2 mm
OT FIT 18/220...240/450 CS PC
27…40 V 225 / 325 / 350 / 450 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 18/220...240/450 CS PC SC
27…40 V 225 / 325 / 350 / 450 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 30/220…240/700 CS PC
27…40 V 500 / 700 mA 95.0 mm 53.0 mm 30.0 mm
OT FIT 40/220...240/1A0 CS PC
27…40 V 800 / 900 / 950 / 1050 mA 108.0 mm 67.0 mm 22.0 mm
OT FIT 40/220...240/1A0 CS PC SC
27…40 V 800 / 900 / 950 / 1050 mA 108.0 mm 67.0 mm 22.0 mm

Information about Family

Constant Current SELV drivers with leading- or trailing-edge dimming.

The compatibility with the most common leading-edge and trailing-edge phase dimmers and the possibility of dimming from 5-100% marks one of the key characteristics. Others include a cable clamp for independent installations and DIP switsches for 4 output currents per wattage.
Areas of application
  • Decorative illumination
  • Downlights, flat luminaires
  • Hospitality
  • Living areas
  • Museums, residential buildings
  • Offices
  • Shop lighting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection class I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads