OPTOTRONIC FIT CS MINI

Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression according to CISPR 15
  • Line harmonics according to IEC 61000-3-2
  • Immunity according to IEC 61547
Product family benefits
  • Small housing for flexible luminaire designs
  • Higher quality of light thanks to < 3% output ripple current
  • Operating temperature: up to 60 °C
  • User flexibility with four different output currents from one driver
  • Flexible current selection via DIP switch
  • Reversible overtemperature, overload, short-circuit and open-circuit protection
  • High efficiency (up to 90%)

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 8/220…240/180 CS S MINI
30…42 V 90/120/150/180 mA 87.0 mm 30.0 mm 20.0 mm
OT FIT 8/220…240/180 CS I MINI
30…42 V 90/120/150/180 mA 104.0 mm 30.0 mm 26.0 mm
OT FIT 15/220-240/350 CS S MINI
30…42 V 225/250/325/350 mA 87.0 mm 35.0 mm 22.0 mm
OT FIT 20/220-240/500 CS S MINI
30…42 V 400/450/475/500 mA 87.0 mm 35.0 mm 22.0 mm
OT FIT 30/220-240/700 CS S MINI
30…42 V 550/600/650/700 mA 87.0 mm 35.0 mm 22.0 mm
OT FIT 38/220-240/900 CS S MINI
30…42 V 800/850/875/900 mA 87.0 mm 35.0 mm 22.0 mm

Information about Family

Extra small high-quality solution for multiple applications.

A great flexibility at luminaire design is given due to the extra small dimensions thereby the device is suitable for compact luminaires. In addition the product offers a wide operating window 8W-28W and 90 mA – 900 mA as well as an easy current setting via DIP-switches.
Areas of application
  • Extra small design for downlights, spotlights and other indoor luminaries
  • Suitable for luminaires of protection classes I and II
  • Suitable for indoor SELV installations
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads