OTi DALI 35/220…240/1A0 LT2

Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Very high efficiency
  • Protection of the system thanks to thermal management and Smart Control
  • High-quality dimming of 1…100 % by amplitude dimming
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Areas of application
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Installation via Cable Clamp Kit possible (depending on version of product)
German innovation awards 2019 winner DALI 2 Logo black and white 540301_SELV, short circuit proof

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Permitted voltage range

Input voltage DC

176…276 V

Total harmonic distortion

< 20 %

Power factor λ

0.72C...0.95

Efficiency in full-load

89 %

at 230 V, 50 Hz

Device power loss

5.7 W

Inrush current

< 20 A

twidth = 50 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

35

Max. ECG no. on circuit breaker 16 A (B)

55

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

15…54 V

Maximum 60 V

U-OUT (working voltage)

60 V

Nominal output current

350…1050 mA

±3%

Output current LEDset open

175 mA

Output current LEDset shorted

700 mA

Default output current

700 mA

LEDset deactivated

Output current tolerance

±3 %

Output ripple current (100 Hz)

< 2 %

Ripple average at 100 Hz

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

35 W

Partial load 15…35 W

Maximum output power

35 W

Power loss in stand-by mode

<0.1 W

Current set

DALI / LEDset2

Networked standby power

≤0.10 W

at 230 V, 50 Hz

Galvanic isolation primary/secondary

SELV

Galvanic isolation DALI/mains

Basic

Galvanic isolation DALI/output

SELV

Dimensions & weight

Mounting hole spacing, length

94.0 mm

Mounting hole spacing, width

58.0 mm

Product weight

149.00 g

Cable cross-section, input side

0.2…1.5 mm²

Solid or flexible leads

Cable cross-section, output side

0.2…1.5 mm²

Solid or flexible leads

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

103.0 mm

Height

29.5 mm

Width

67.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

75 °C

Maximum at the Tc-point

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-25…85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

Tc = 75°C, 0.2% / 1,000 h failure rate / Tc = 65°C, 0.1% / 1,000 h failure rate

Capabilities

Dimmable

Yes

Dimming interface

DALI-2 / Touch DIM / Touch DIM Sensor

Dimming range

1…100 %

For maximum nominal output current

Dimming method

Amplitude Modulation

Constant lumen function

Programmable

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Suitable for emergency lighting

Yes

Type of connection, output side

Push terminal

Number of channels

1

DALI-2 Energy Data

Yes

Acc. DALI part 252

DALI-2 Diagnostic Data

Yes

Acc. DALI part 253

Suitable for through-wiring

Yes with optional cable clamp

Programming interface

DALI, LEDset

Programming

Programming device

DALI / LEDset

Tuner4TRONIC Field App

No

Programmable features

Operating Current

Yes

Lamp Operating Time

Yes

Driver Guard

No

DALI Settings

Yes

Emergency Mode

Yes

DALI-2 Luminaire Data

Yes

Acc. DALI part 251

Configuration Lock

No

Soft Switch Off

Yes

Dim to Dark

No

TouchDIM + Sensor

Yes

Corridor Functionality

Yes

OEM Key

Yes

Certificates & standards

Approval marks – approval

ENEC 10 / VDE / EMC / EL / CE / DALI-2

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1

Protection class

II

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

12-05-2023

Primary Article Identifier

4052899488168

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

ef386587-888a-4ecb-97c0-d615a42f9032

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899488168 UNV

Unpacked

1 67mm x 30mm x 103mm 149.00g 0.20dm³
4052899488175 VS

Shipping box

20 345mm x 216mm x 86mm 3211.00g 6.41dm³

Downloads

Accessories optional

Information about Family

Intelligent compact SELV DALI drivers for premium lighting.

This Compact LED Driver is fully digitally programmable by DALI and LT2 and includes 1…100% dimming. The very wide operating window and an optional cable clamp for independent installation and through-looping allow some flexibility in its usage.
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
  • RI suppression: to EN 55015/CISPR 15
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h
  • Type of protection: IP20
  • Independent connection via through-looping (except OTi DALI 15)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 15/220…240/1A0 LT2
7.5…54 V 150…1050 mA 95.0 mm 53.0 mm 30.0 mm
OTi DALI 25/220…240/700 LT2
12…54 V 180…700 mA 103.0 mm 67.0 mm 29.5 mm
OTi DALI 35/220…240/1A0 LT2
15…54 V 350…1050 mA 103.0 mm 67.0 mm 29.5 mm
OTi DALI 50/220…240/1A4 LT2 FAN
15…54 V 600…1400 mA 110.0 mm 75.0 mm 25.0 mm