OTi QBM 30/220...240/700 NFC I

Product family benefits
  • Versatile QBM window driver due to flexible output characteristic
  • Locking and unlocking of programmable features
  • Easy and fast output current setting via NFC
  • Very high efficiency
  • High-quality dimming of 1…100 % by amplitude dimming
Areas of application
  • Suitable for downlights, spotlights and LED panels
  • Suitable for use in luminaires with flexible current setting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
German innovation awards 2019 winner OSRAM works with HUBSENSE osram-dam-4067401 540301_SELV, short circuit proof

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0,50,60 Hz

Input voltage AC

198…264 V

Permitted voltage range

Input voltage DC

176…276 V

Total harmonic distortion

< 10 %

At full load, 220…240 V, 50 Hz / see graphs

Power factor λ

≥ 0.95

Efficiency in full-load

90 %

at 230 V, 50 Hz

Inrush current

< 20 A

twidth = 200 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

20

Max. ECG no. on circuit breaker 16 A (B)

30

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

20…50 V

Maximum 60 V

U-OUT (working voltage)

60 V

Nominal output current

350…700 mA

±5%

Default output current

500 mA

Output current tolerance

±5 %

Output ripple current (100 Hz)

< 5 %

Ripple average at 100 Hz

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

30 W

Partial load 10…30 W

Maximum output power

30 W

Current set

NFC

Radio frequency

2.4 GHz

Maximum TX power

+4 dBm

2.512 mW

Wireless protocol

Qualified Bluetooth mesh enabled by Silvair

Wireless range

10 m line of sight

Networked standby power

<0.22 W

at 230 V, 50 Hz

Galvanic isolation primary/secondary

SELV

Power loss in stand-by mode

<0.15 W

Dimensions & weight

Mounting hole spacing, length

186.5 mm

Product weight

160.00 g

Cable cross-section, input side

0.75…2.5 mm²

Solid or flexible leads

Cable cross-section, output side

0.5…1.5 mm²

Solid or flexible leads

Wire preparation length, input side

6.0 mm

Wire preparation length, output side

7…8 mm

Length

204.0 mm

Height

32.0 mm

Width

50.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Temperature range at storage

-25…85 °C

Max.housing temperature in case of fault

110 °C

Maximum temperature at tc test point

80 °C

Maximum at the Tc-point

Lifespan

ECG lifetime

50000 / 100000 h

Tc = 80°C, 0.2% / 1,000 h failure rate / Tc = 70°C, 0.1% / 1,000 h failure rate

Additional product data

Encapsulated

No

Capabilities

Dimmable

Yes

Dimming interface

Qualified Bluetooth mesh by Silvair

Dimming range

1…100 %

Dimming method

Amplitude Modulation

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Screw terminal

Type of connection, output side

Push terminal

Constant lumen function

Programmable

Control interface

qualified Bluetooth mesh

DALI-2 Energy Data

No

DALI-2 Diagnostic Data

No

Suitable for emergency lighting

Yes

Programming interface

NFC

Suitable for through-wiring

Yes

Number of channels

1

Reset

Manual

see additional product information

Programming

Programming device

NFC

Box programming

Yes

Tuner4TRONIC

Yes

Tuner4TRONIC Field App

Yes

Programmable features

Dim to Dark

Yes

Emergency Mode

Yes

Configuration Lock

Yes

OEM Key

No

Driver Guard

Yes

Soft Switch Off

Yes

Certificates & standards

Approval marks – approval

CE / EL / EAC

In preparation

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62479/Acc. to ETSI EN 300 328/Acc. to ETSI EN 301 489-17/Acc. to ETSI EN 301 489 - 1

Protection class

II

Type of protection

IP20

Logistical data

Commodity code

85044095900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

07-07-2023

Primary Article Identifier

4062172115049

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

27499a45-fac3-4510-a0cd-d7682f1fa53a

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172115049 UNV

Unpacked

1
4062172115056 VS

Shipping box

20 428mm x 173mm x 121mm 3467.00g 8.96dm³

Downloads

Accessories optional

Information about Family

Miniaturization – wireless communication

The main benefit of this driver is the qualified Bluetooth mesh that was enabled by Silvair and works with OSRAM HubSense. Further highlights include 1…100% dimming and a wide operating window. An independent version with cable clamps, screw terminals on the primary side and through-looping is also available.
Product family features
  • Qualified Bluetooth mesh enabled by Silvair
  • Works with OSRAM Hubsense
  • Cable clamp housing for independent mounting
  • Through-looping
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi QBM 30/220...240/700 NFC I
20…50 V 350…700 mA 204.0 mm 50.0 mm 32.0 mm
OTi QBM 40/220...240/1A0 NFC I
20…50 V 500…1050 mA 204.0 mm 50.0 mm 32.0 mm