OT 1DIM NFC IP20 Outdoor

Product family features
  • Supply voltage: 220…240 V
  • Current output range: 70…1,050 mA
  • AstroDIM for autonomous dimming with five independent levels (astro, time mode)
  • Standby power consumption: < 0.5 W
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
Product family benefits
  • Easy and fast wireless luminaire programming
  • Very high efficiency
  • Optimized for AstroDIM operation
  • Wide current output range: 200 mA…1050 mA
  • High surge protection: up to 10 kV (in protection class I or II)
  • Great flexibility due to wide operating temperature range of -40…55 °C
  • Protection through double isolation between mains input and LED output

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT 20/170…240/1A0 1DIMLT2 G1 CE
10…38 V 200…1050 mA 123.0 mm 79.0 mm 33.0 mm
OT 40/170…240/1A0 1DIMLT2 G1 CE
15…56 V 200…1050 mA 123.0 mm 79.0 mm 33.0 mm
OT 75/170…240/1A0 1DIMLT2 G1 CE
35…115 V 200…1050 mA 133.0 mm 77.0 mm 40.0 mm
OT 110/170...240/1A0 1DIMLT2 G1 CE
80…220 V 200…1050 mA 150.0 mm 90.0 mm 40.0 mm
OT 75/220...240/1A0 1DIM G2 CE
35…115 V 200…1050 mA 133.0 mm 77.0 mm 40.0 mm
OT 165/220...240/1A0 1DIM G2 CE
130…260 V 200…1050 mA 150.0 mm 90.0 mm 39.5 mm

Information about Family

Best fit for reliable AstroDIM applications

An easy and fast wireless luminaire programming is made possible via NFC. The AstroDIM operation for which this driver is optimized allows autonomous dimming with five independent levels (astro, time mode). The surge protection goes up to 10 kV which correspond to protection class I or II.
Areas of application
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP > 65
  • Suitable for use in outdoor luminaires of protection class I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now