OT 2DIM IP64 Outdoor

Product family features
  • Available with different wattage: 50 W, 100 W, 110 W
  • Input voltage: 120…277 V
  • Available with output current range: up to 1,400 mA
  • Flexible current setting with one additional wire (LEDset2)
  • AstroDIM for autonomous dimming with five independent levels (astro mode)
  • Isolated 0…10 V interface for unidirectional telemanagement systems
  • Constant Lumen Output (CLO)
  • Overtemperature protection with external NTC or LEDset2 interface
Product family benefits
  • 2DIM functionality in one device (AstroDIM, 0…10 V)
  • High surge protection: up to 6 kV (in protection class I or II)
  • Fast programming without mains voltage
  • High efficiency
  • Great flexibility due to wide operating temperature range of -40…55 °C
  • Protection through double isolation between mains input and LED output
  • IP rating: IP64
Equipment / Accessories
  • OT Programmer hardware for configuration of 2DIM ECGs necessary
  • Programmable via Tuner4TRONIC software

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT 50/120…277/800 2DIMLT2 P
30…115 V 350…800 mA 168.0 mm 50.0 mm 30.0 mm
OT 50/120…277/1A2 2DIMLT2 P
20…55 V 600…1250 mA 168.0 mm 50.0 mm 30.0 mm
OT 100/120…277/800 2DIMLT2 P
50…186 V 350…800 mA 168.0 mm 68.0 mm 38.0 mm
OT 110/120…277/1A4 2DIMLT2 P
35…85 V 600…1400 mA 168.0 mm 68.0 mm 38.0 mm

Information about Family

0-10V controllable LED driver family incl. AstroDIM functionality

The AstroDIM for autonomous dimming offers five independent levels (astro, time mode) and an isolated 0…10 V interface supports unidirectional telemanagement systems. Another benefit of this driver is the fast programming without mains voltage as well as an IP ration of IP64.
Areas of application
  • Street and urban lighting
  • Industry
  • Suitable for luminaires of protection classes I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now