Digital Systems
 

OT 165/170…240/1A0 4DIMLT2 E

Product family benefits
  • 4DIM functionality in one device (StepDIM, AstroDIM, MainsDIM, DALI)
  • Very high efficiency
  • High surge protection: up to 10 kV (1 pulse) / 8 kV, in protection class I or II
  • Low luminous efficacy tolerance through low output current tolerance of ± 3 %
  • Great flexibility due to wide operating temperature range of -40…55 °C or 60 °C
  • Protection through double isolation between mains input and LED output
Areas of application
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP > 54
  • Suitable for use in outdoor luminaires of protection class I and II
Equipment / Accessories
  • DALI magic hardware for configuring 4DIM ECGs necessary
  • Programmable via Tuner4TRONIC software
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal voltage

220…240 V

Input voltage AC

170…264 V

Permitted voltage range

Nominal current

0.78 A

At 230 V

Mains frequency

50…60 Hz

Additional fuse needed in DC operation

Power factor λ

0.95/0.90

Minimum/Full load at 230 V/Half load at 230 V

Total harmonic distortion

10 %

Max. output power at 230 VAC

Device power loss

13 W

Maximum

Inrush current

62 A

twidth = 330 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

5

Type B

Max. ECG no. on circuit breaker 16 A (B)

8

Type B

Max. ECG no. on circuit breaker 25 A (B)

14

Type B

Surge capability (L/N-Ground)

10 kV

Single pulse 10kV / 12 Ohm (1.2/50 μs)

Surge capability (L-N)

6 kV

@ 2 Ohm, acc. to EN61547

Nominal output power

165 W

Partial load 32…165 W

ECG efficiency

92 %

At full load and 230 V

Nominal output voltage

90…285 V

90…242 V for output current >680 mA

Nominal output current

120…1050 mA

Output current LEDset open

70 mA

Output current LEDset shorted

70 mA

Default output current

700 mA

Output current tolerance

±3 %

Within nominal output current range

Output ripple current (100 Hz)

15 %

Output PSTLM

≤1

Output SVM

≤0.4

Minimum output current

120 mA

Physical Minimum Dimming Current 70 mA

Galvanic isolation

double/reinforced

Surge capability (L/N – SD)

6 kV

@ 2 Ohm, acc. to EN61547

U-OUT (working voltage)

300 V

Surge capability (SD – Ground)

10 kV

Single pulse 10kV / 12 Ohm (1.2/50 μs)

Max. no. of ECGs on 16A MCB with EBN-OS

15

Nominal input voltage (SD port)

220…240 V

In relation to N

Dimensions & weight

Length

170.0 mm

Width

100.0 mm

Height

40.0 mm

Mounting hole spacing, length

160.0 mm

Mounting hole spacing, width

90.0 mm

Product weight

1100.00 g

Cable cross-section, input side

0.25…2.5 mm²

Flexible

Cable cross-section, output side

0.2…1.5 mm²

Flexible

Wire preparation length, input side

10…11 mm

Equipotential pole 8.5…9.5

Temperatures & operating conditions

Ambient temperature range

-40…+55 °C

Temperature range at storage

-25…80 °C

Maximum temperature at tc test point

85 °C

Maximum at the Tc-point

Max.housing temperature in case of fault

120 °C

Permitted rel. humidity during operation

5…85 %

Non condensing, absolute humidity: 36g/m³

Lifespan

ECG lifetime

85000 h

At Tcase = 75°C at Tc point / 10% failure rate

ECG ambient temperature (ta)

55 °C

45 °C

43 °C

Temperature at the measuring point tc (°C)

85 °C

75 °C

72 °C

ECG lifespan (h)

50000 h

Max. 10% failure rate at tc max and input voltage 230 VAC

85000 h

Max. 10% failure rate at tc max and input voltage 230 VAC

100000 h

Max. 10% failure rate at tc max and input voltage 230 VAC

Capabilities

Dimmable

Yes

Dimming interface

4DIM / DALI / StepDIM / AstroDIM / MainsDIM

Dimming range

17…100 %

For ≥700 mA nominal output current

Suitable for fixtures with prot. class

I / II

Constant lumen function

Programmable

NTC input

Yes

Supports 15K, 5 %, NCP18XW153J03RB

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Max. cable length to lamp/LED module

2.0 m

DALI-2 Energy Data

No

DALI-2 Diagnostic Data

No

Number of channels

1

Programming

Tuner4TRONIC Field App

No

Programming device

DALI

Tuner4TRONIC

Yes

Programmable features

Operating Current

Yes

Tuning Factor

No

Constant Lumen

Yes

Lamp Operating Time

Yes

End of Life

Yes

Thermal Protection

Yes

Driver Guard

No

AstroDIM

Yes

StepDIM

Yes

MainsDIM

Yes

Presence Detection

Yes

DALI Settings

Yes

Emergency Mode

Yes

DALI-2 Luminaire Data

No

OEM Key

Yes

Certificates & standards

Type of protection

IP20

IP Fixture rating > IP54

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to EN 61547/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 62386-101/Acc. to IEC 62386-102/Acc. to IEC 62386-207

Approval marks – approval

CE / ENEC 10 / VDE / VDE-EMC / CQC

Logistical data

Commodity code

850440829000

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899925212 UNV

Unpacked

1 80.00g
4052899925250 VS

Shipping box

10 303mm x 285mm x 205mm 11637.00g 17.70dm³

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now

Information about Family

This programmable constant current LED power supply brings you lots of functionality and options in one product family. Available in a choice of wattage (40 W, 60 W, 90 W, 165 W) and input voltages, it is ideal for street lighting, urban and industrial lighting. You can use it in luminaires of protection classes I and II, and outside in luminaires with protection of IP54 or greater. You get a choice of 4 dimming capabilities including DALI, constant lumen function and overtemperature protection via external NTC. If programmable, dimmable light is what you need, then look no further.
Product family features
  • Available with different wattage: 40 W, 60 W, 90 W, 165 W
  • Input voltage: 120…277 V (40 W), 220…240 V (60 W, 90 W, 165 W)
  • Current output range: 70…1,050 mA
  • Flexible current setting with one additional wire (LEDset2)
  • AstroDIM for autonomous dimming with five independent levels (astro, time mode)
  • Allows for energy saving in twilight phases
  • MainsDIM function for dimming via reduction of line voltage amplitude
  • Isolated DALI interface for bidirectional telemanagement systems
  • Standby power consumption: < 0.5 W
  • Constant Lumen Output (CLO)
  • Overtemperature protection via external NTC

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT 40/120…277/1A0 4DIMLT2 E
15…56 V 70…1050 mA 123.0 mm 79.0 mm 33.0 mm
OT 60/170…240/1A0 4DIMLT2 E
30…115 V 75…1050 mA 133.0 mm 77.0 mm 40.0 mm
OT 90/170…240/1A0 4DIMLT2 E
57…186 V 70…1050 mA 133.0 mm 77.0 mm 40.0 mm
OT 165/170…240/1A0 4DIMLT2 E
90…285 V 120…1050 mA 170.0 mm 100.0 mm 40.0 mm