PL-FLAT-AC-DA-G3 4000-840
- Touch protection accessory for simple use in luminaires
- High reliability
- Easy to use
- Optimised design for simple thermal management
- Enables thin and efficient luminaire designs
- High quality of light thanks to low modulation
- 5 year guarantee
- Corridors
- Stairways
- Landings
- Hallways
- Emergency lighting for single battery systems
- Luminaires for emergency lighting with central battery according to IEC 60598-2-22
References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal voltage
230 V
Input voltage range
220…240 V
Type of current
AC
Networked standby power
0.50 W
Energy consumption in on-mode
25.3 kWh/1000h
On-mode power
25.30 W
Output SVM
≤0.9
Output PSTLM
≤1
Input voltage DC
176…276 V
Inrush current
1,7 A
Mains frequency
0/50/60 Hz
Input voltage AC
220…240 V
Displacement factor (cos φ1)
0.90
Max. ECG no. on circuit breaker 16 A (B)
85
Max. ECG no. on circuit breaker 10 A (B)
53
Photometrical data
Luminous efficacy
129 lm/W
Colour consistency (McAdam ellipses)
3
Color rendering index Ra
80
Light color (designation)
Neutral White
Correlated color temperature CCT
4000 K
Useful luminous flux (Φuse)
3300 lm
Light technical data
Starting time
0.5 s
Warm-up time (60 %)
0.20 s
Dimensions & weight
Diameter
335.0 mm
Product weight
300.00 g
Height
15.0 mm
Width
335.0 mm
Length
335.0 mm
Temperatures & operating conditions
Performance temp. acc. to IEC 62717
75 °C
Maximum temperature at tc test point
95 °C
Ambient temperature range
-20…+50 °C
Temperature range at storage
-20…85 °C
Lifespan
Number of switching cycles
100000
L70B50 lifetime
50000 h
Lumen maintenance factor LMF
96
Additional product data
Product remark
For current photometric data and important safety, installation and application information (see www.osram.com/led-systems)./All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values/Tolerance for optical and electrical data: +/-10%
Lighting technology used
LED
Capabilities
Dimming interface
DALI
Dimming range
1…100 %
Programming
Tuner4TRONIC Field App
No
Programming device
DALI
Tuner4TRONIC
Yes
Certificates & standards
Standards
CE
Type of protection
IP20
Energy efficiency class
E
Logistical data
Commodity code
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
30-06-2023
Primary Article Identifier
4052899605640
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
e422071d-c72e-4123-9f5a-77b1afbd5609
Downloads
Data sheets
Accessories optional
Information about Family
This device offers a variety in lighting: from DALI or Phase cut dimmable to HF detectors and emergency lighting. An integrated LED driver into the LED board and a touch protection accessory for a simple use in luminaires are some special features.
- Dimming range (DALI): 1…100 %
- Dimensions of DALI version identical to on/off version
- Designed for wall and ceiling luminaires with diffuse light distribution
- Low-cost LED replacement of CFL wall-, and ceiling luminaires
- Driver integrated on LED board
- Available diameter: 170 mm, 240 mm, 335 mm, 415 mm
- Available with color temperature: 3,000 K or 4,000 K
- Available with luminous flux: 1,500 lm, 2,500 lm, 4,000 lm, 5,000 lm
- Lifetime (L70/B50): 50,000 h (temperature at Tc = 80 °C)
- LED module is reinforced isolated to mounting surface
- Photobiological safety according to IEC/TR 62778, risk group RG1
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
Data sheet | ||
|---|---|---|---|---|---|
|
PL-FLAT-AC-DA-G3 1500-830
|
230 V | 170.0 mm | ||
|
|
PL-FLAT-AC-DA-G3 1500-840
|
230 V | 170.0 mm | ||
|
PL-FLAT-AC-DA-G3 2500-830
|
230 V | 240.0 mm | ||
|
|
PL-FLAT-AC-DA-G3 2500-840
|
230 V | 240.0 mm | ||
|
|
PL-FLAT-AC-DA-G3 4000-830
|
230 V | 335.0 mm | ||
|
|
PL-FLAT-AC-DA-G3 4000-840
|
230 V | 335.0 mm | ||
|
PL-FLAT-AC-DA-G3 5000-830
|
230 V | 415.0 mm | ||
|
|
PL-FLAT-AC-DA-G3 5000-840
|
230 V | 415.0 mm |