QBM 220-240 LS/PD HB

Product family benefits
  • Ambient light dependent control and presence detection
  • Shutter included to optimize sensor detection
  • Simplified mounting for flush device boxes
  • Motion detection height up to 14 m
Areas of application
  • Suitable for high installation heights
  • Entrance halls
  • Industry
  • Production halls
Equipment / Accessories
  • Surface and recessed ceiling mounting via QBM 220-240 LS/PD CM KIT
OSRAM works with HUBSENSE osram-dam-4067401

Technical Data

Electrical data

Nominal voltage

220…240 V

Mains frequency

50…60 Hz

Radio frequency

2.4 GHz

Maximum TX power

+4 dBm

2.512 mW

Wireless protocol

Qualified Bluetooth mesh enabled by Silvair

Wireless range

15 m line of sight

Guaranteed supply current (DALI)

16 mA

Maximum supply current (DALI)

250 mA

System wattage

1.00 W

Standby power

< 0.5 W

Average input current

14 mA

Dimensions & weight

Diameter

105.0 mm

Mounting hole spacing, diagonal

68…80 mm

Height

66.5 mm

Product weight

208.22 g

Cable cross-section, input side

1.0…2.5 mm²

Wire preparation length, input side

6…8 mm

Wire preparation length, output side

6…8 mm

Cable cross-section, output side

1.0…2.5 mm²

Colors & materials

Product color

White

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Permitted rel. humidity during operation

0…90 %

Temperature range at storage

-20…70 °C

Permitted relative humidity at storage

0…90 %

Maximum temperature at tc test point

75 °C

Lifespan

Lifespan

50000 h

At Tc max

Capabilities

Control interface

qualified Bluetooth mesh

Number of control outputs

1

DALI-2 LED Driver (Part-207), broadcast

Number of connected drivers

8

Type of sensor

Daylight / PIR

Operating range, light sensor

10…1500 lx

Detection angle (Light sensor)

+/- 30°

Detection angle (PIR)

+/- 55°

Maximum installation height

14 m

Dimmable

Yes

Compatibility

Works with OSRAM HubSense

Status Indicator

Blue: Network status

see additional product information

Dimming interface

DALI-2

Control output

DALI-2

Detection angle

40 °

Reset

Manual

Number of supported push buttons

4

Type of installation

On-top ceiling mounting

Certificates & standards

Approval marks – approval

CE

Standards

Acc. to EN 55015 / Acc. to EN 61347-2-11 / Acc. to EN 61547 / Acc. to EN 62479 / Acc. to ETSI EN 300 328 / Acc. to ETSI EN 301 489-17 / Acc. to ETSI EN 301 489 - 1 / Acc. to EN 61347-2-1 / IEC 62386-101 / IEC 62386-103 / EN 62493

Logistical data

Commodity code

853710989900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

01-04-2022

Primary Article Identifier

4062172161169

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

69a379e2-b491-4adc-8ba1-e556769a2805

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172161169 FS

Folding box

1 123mm x 123mm x 95mm 266.00g 1.44dm³
4062172161176 VS

Shipping box

24 525mm x 390mm x 215mm 7209.00g 44.02dm³

Downloads

Information about Family

Product family features
  • Presence detection via passive IR element
  • Detection height up to 14 meter
  • Qualified Bluetooth mesh enabled by Silvair
  • Works with OSRAM Hubsense
  • Suitable for up to 8 DALI-2 LED drivers (Part - 207) in broadcast mode

Products

Sort by:
Product
Nominal voltage
Mains frequency
Radio frequency
Maximum TX power
Wireless protocol
Data sheet
QBM 220-240 LS/PD HB
220…240 V 50…60 Hz 2.4 GHz +4 dBm Qualified Bluetooth mesh enabled by Silvair