QT-ECO 2X5 11 S
Product family benefits
- Compact housing
- Automatic restart after lamp replacement
- Large input voltage range
Areas of application
- Public buildings
Technical Data
Electrical data
Nominal voltage
220 240 V
Mains frequency
50 Hz
Input voltage DC
176 254 V
Maximum output power
2 x 11 W
Efficiency in full-load
87 %
Operating frequency
30 45 kHz
Max. ECG no. on circuit breaker 10 A (B)
51
Max. ECG no. on circuit breaker 16 A (B)
84
Inrush current
12 A
Light technical data
Starting time
2.0 s
Dimensions & weight
Length
80.0 mm
Width
40.0 mm
Height
22.0 mm
Mounting hole spacing, length
72.0 75.0 mm
Product weight
52.00 g
Temperatures & operating conditions
Ambient temperature range
-15 +50 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
30000 h
Additional product data
Suitable for lamp power (2 lamps)
5 11 W
Capabilities
End of lamp life safety shutdown
EOL T.2
Suitable for fixtures with prot. class
I / II
Dimmable
No
Intended for no-load operation
No
Max. cable length to lamp/LED module
1.0 m / 0.5 m
Certificates & standards
Approval marks approval
VDE
EEI Energy Label
A2 BAT
Standards
Acc. to EN 55015, CISPR 15/Acc. to EN 61547/IEC 61547/Acc. to EN 61000-3-2/IEC 61000-3-2/Acc. to EN 61347-2-3/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
85041080900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4050300821504
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
da5e7e7f-b368-466c-9a51-0c0f7db9520a
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4050300821504 |
UNV
| 1 | 80mm x 40mm x 22mm | 52.00g | 0.07dm³ |
4050300821511 |
VS
| 50 | 246mm x 160mm x 178mm | 3041.00g | 7.01dm³ |
Downloads
Data sheets
Lamp-ECG Combination
DULUX D/E 10 W
Nominal current
0.14 A
Nominal wattage + Power loss
20.00 W
Power factor λ [PIM]
0.60 c
Luminous flux at 25 °C
600 lm
Number of lighting outlets
2
EEI Energy Label
A2 BAT
DULUX S/E 11 W
Nominal current
0.16 A
Nominal wattage + Power loss
24.00 W
Power factor λ [PIM]
0.60 c
Luminous flux at 25 °C
700 lm
Number of lighting outlets
2
EEI Energy Label
A2 BAT
ECG_1.1 Ambient temperature for lifespan
40 °C
ECG_1.2 Ambient temperature for lifespan
50 °C
ECG_1.3 Ambient temperature for lifespan
60 °C
ECG_2.1 Tc point temperature for lifespa
55 °C
ECG_2.2 Tc point temperature for lifespa
65 °C
ECG_2.3 Tc point temperature for lifespa
75 °C
ECG_3.1 Temperature dependent lifespan
100000 h
ECG_3.2 Temperature dependent lifespan
50000 h
ECG_3.3 Temperature dependent lifespan
30000 h
DULUX S/E 9 W
Nominal current
0.13 A
Nominal wattage + Power loss
18.00 W
Power factor λ [PIM]
0.60 c
Luminous flux at 25 °C
550 lm
Number of lighting outlets
2
EEI Energy Label
A2 BAT
HNS S/E 11W 2G7
HNS S/E 6.5W 2G7
HNS S/E 8W 2G7
L 6 W BASIC
Nominal current
0.11 A
Nominal wattage + Power loss
14.50 W
Power factor λ [PIM]
0.60 c
Luminous flux at 35 °C
280 lm
Number of lighting outlets
2
L 8 W BASIC
Nominal current
0.13 A
Nominal wattage + Power loss
17.50 W
Power factor λ [PIM]
0.60 c
Luminous flux at 35 °C
450 lm
Number of lighting outlets
2
NS 6W G5
NS 7W G5
Information about Family
QUICKTRONIC ECONOMIC is an electronic control gear (ECG) for use in professional lighting projects with compact fluorescent lamps and T2 lamps. It has an energy efficiency rating of A2 or A3, depending on the lamp, and provides automatic shutdown of lamps in the event of unit defect or failure. Ideal for the illumination of public buildings, QUICKTRONIC ECONOMIC offers you the benefits of a large input voltage range, automatic restart after lamp replacement and compact housing.
Product family features
- Supply voltage: 220 240 V
- Line voltage: 198 264 V
- Line frequency: 50 Hz
- Energy Efficiency Index EEI: A2 / A3 (depending on lamp)
- Automatic shutdown of defective lamps and at end of life (EoL)
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
QT-ECO 1X4
16 S
|
22.0 mm | No | 30000 h | 80.0 mm | 40.0 mm | ||
![]() |
QT-ECO 1X18
24 S
|
22.0 mm | No | 30000 h | 80.0 mm | 40.0 mm | ||
![]() |
QT-ECO 1X26 S
|
22.0 mm | No | 30000 h | 80.0 mm | 40.0 mm | ||
![]() |
QT-ECO 2X5
11 S
|
22.0 mm | No | 30000 h | 80.0 mm | 40.0 mm |