Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Energy Efficiency Index EEI: A2
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Lamp operation: to EN 60929
  • Safety: to EN 61347-2-3
Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Automatic restart after lamp replacement
  • Perfect lamp start for applications with motion sensors
  • VDE/VDE EMC certified system
  • Very high energy efficiency due to cut-off technology


Sort by:
ECG lifetime
Data sheet
QT-FIT5 1X14…35
21.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT5 2X14…35
21.0 mm No 280.0 mm 30.0 mm
QT-FIT5 3X14,4X14
21.0 mm No 50000 h 280.0 mm 40.0 mm
QT-FIT5 1X49
21.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT5 2X49
21.0 mm No 50000 h 280.0 mm 30.0 mm

Information about Family

When it comes to ECG installation, the QUICKTRONIC FIT 5 ECG is a great option if you are using T5 lamps. Available in a choice of specifications, key features include lamp start with optimal filament preheating, an energy efficiency index of A2, and automatic shutoff of defective lamps and at end of life. Use it with luminaires of protection class I, for open-plan office lighting, corridors, storage rooms, public buildings and strip lighting. Benefits include long lamp life, the ability to withstand frequent on/off switching without harm, automatic restart after lamp replacement and very high levels of efficiency thanks to the unit’s cutoff technology. If your application uses motion sensors, this ECG will give perfect lamp start, and its VDE/VDE EMC certified system gives reliability and safety assurances.
Areas of application
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Strip lighting
  • Suitable for luminaires of protection class I
  • Modernization of existing systems
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.