QT-FIT8 2X18

Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Automatic restart after lamp replacement
  • Perfect lamp start for applications with motion sensors
  • VDE/VDE EMC certified system
  • Very high energy efficiency due to cut-off technology
Areas of application
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Strip lighting
  • Suitable for luminaires of protection class I

Technical Data

Electrical data

Input voltage AC

198…264 V

Nominal voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage DC

185…264 V

Minimum voltage for lamp ignition: 198 V, 185…198 V for maximum 1 h

Maximum output power

2 x 18 W

Efficiency in full-load

87 %

at 230 V, 50 Hz

Operating frequency

40…50 kHz

Max. ECG no. on circuit breaker 10 A (B)

17

Type B

Max. ECG no. on circuit breaker 16 A (B)

28

Type B

Inrush current

15 A

Light technical data

Starting time

2.0 s

Dimensions & weight

Length

360.0 mm

Width

30.0 mm

Height

28.0 mm

Mounting hole spacing, length

350.0 mm

Product weight

233.00 g

Cable cross-section, output side

0.5…1.5 mm²

Solid leads

Cable cross-section, input side

0.5…1.5 mm²

Solid leads

Temperatures & operating conditions

Ambient temperature range

-15…+50 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h

At maximum Tc / 10% failure rate

Additional product data

Suitable for lamp power (2 lamps)

18 W

Capabilities

End of lamp life safety shutdown

EOL T.2

Suitable for fixtures with prot. class

I

Max. cable length to lamp/LED module

2.0 m / 1.0 m

Intended for no-load operation

No

Dimmable

No

Certificates & standards

Approval marks – approval

VDE / VDE-EMC / ENEC 10 / CE

EEI – Energy Label

A2

Standards

Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547

Type of protection

IP20

Protection class

I

Logistical data

Commodity code

850410809000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

14-04-2022

Primary Article Identifier

4008321294241

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

dd2a7a8e-91b4-4468-bc01-669249bfac98

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4008321294241 UNV

Unpacked

1 360mm x 30mm x 28mm 233.00g 0.30dm³
4008321294258 VS

Shipping box

20 391mm x 131mm x 161mm 5271.00g 8.25dm³

Downloads

Lamp-ECG Combination
L 18 W

Nominal current

0.16 A

Nominal wattage + Power loss

36.00 W

Power factor λ [PIM]

0.98

Luminous flux at 35 °C

1350 lm

Number of lighting outlets

2

Information about Family

If you are upgrading an existing system, or creating a new light installation with T8 lamps, consider the QUICKTRONIC FIT 8 ECG. It has lamp start with optimum filament preheating, an energy efficiency index of A2 and automatic shutoff of defective lamps and at end of life, and you can use it with luminaires of protection class I for open plan office lighting, corridors, storage rooms, strip lighting and in public buildings. If your LMS uses motion sensors, this ECcG will give you perfect lamp start, and withstand frequent on/off switching. The QUICKTRONIC FIT 8 ECG for T8 lamps enhances lamp life, provides automatic restart after lamp replacement, and is highly energy efficient thanks to its cutoff technology. This ECG has a VDE/VDE MC certified system, assuring you of its quality.
Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Energy Efficiency Index EEI: A2
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Lamp operation: to EN 60929
  • Safety: to EN 61347-2-3
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Height
Dimmable
ECG lifetime
Length
Width
Data sheet
QT-FIT8 1X18
28.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT8 1X36
28.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT8 1X58…70
28.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT8 2X18
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 2X36
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 2X58…70
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 2X58
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 3X18,4X18
28.0 mm No 50000 h 280.0 mm 40.0 mm
QT-FIT8 3X36
28.0 mm No 50000 h 280.0 mm 40.0 mm