QUICKTRONIC INTELLIGENT DALI DIM CFL

Product family features
  • Corridor function for direct connection of ECG to common motion sensor
  • Corridor function with pre-programmed light program
  • Touch DIM function for free parameterization of light value and turn on time
  • Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
  • Fit for emergency function for automatic detection of emergency lighting by ECG
  • Very low standby power consumption: < 0.5 W
  • Lifetime: > 100,000 h (for T = 65 °C at Tc)
  • Very high number of switching cycles: up to 300,000
  • Dimming range: 1…100 % (3…100 % with compact fluorescent lamp)
  • POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime
  • Line frequency: 0 Hz, 50…60 Hz, rectified AC
Product family benefits
  • System+ Guarantee available
  • Easy integration in luminaire thanks to same dimensions like DALI GI ECG
DALI product features
  • Control via the DALI interface
  • Compliance with the DALI Version-1 and IEC 60929
  • Control input protected against overvoltage and polarity reversal (OSRAM ECG)
Touch DIM and Touch DIM Sensor function
  • Manual dimming without controller and with standard switches
  • Including memory function (double click) and soft start

Products

Sort by:
Product
Width
Height
Dimmable
Dimming interface
Data sheet
QTi DALI-T/E 1x18…57 DIM
79.0 mm 33.0 mm Yes DALI / Touch DIM / Touch DIM Sensor
QTi DALI-T/E 2X18…42 DIM
79.0 mm 33.0 mm Yes DALI / Touch DIM / Touch DIM Sensor

Information about Family

The QUICKTRONIC INTELLIGENT DALI DIM CFL is an ECG that adds a host of features and benefits to any DALI-based light management system (LMS). You will find it easy to integrate into luminaires because it has exactly the same dimensions as the DALI GI ECG, and the QUICKTRONIC INTELLIGENT DALI DIM CFL features a corridor function with pre-programmed light function that lets you directly connect the ECG to a common motion sensor, along with extensive DALI and TouchDIM functionalities. Use it with luminaires of protection class I in emergency installations per EN 50172/DIN VDE 0108-100 and IEC 61347-2-3, appendix J, and it is good for open plan office lighting, public buildings, corridors and storage rooms. A System+ guarantee is available for this item.
Areas of application
  • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
  • Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Suitable for luminaires of protection class I

References / Links
For more information on the system guarantee and the terms and conditions of the guarantee visit www.osram.com/system-guarantee

Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads