QUICKTRONIC PROFESSIONAL 5

Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • Energy Efficiency Index EEI: A2 BAT
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Safety: to EN 61347-2-3
  • Lamp operation: to EN 60929
Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Perfect lamp start for applications with motion sensors
  • Automatic restart after lamp replacement
  • VDE/VDE EMC certified system
  • Very high energy efficiency due to cut-off technology

Products

Sort by:
Product
Height
Dimmable
ECG lifetime
Length
Width
Data sheet
QTP5 1X14…35
21.0 mm No 100000 h 280.0 mm 30.0 mm
QTP5 1X49
21.0 mm No 100000 h 280.0 mm 30.0 mm
QTP5 1X80
21.0 mm No 100000 h 360.0 mm 30.0 mm
QTP5 2X14…35
21.0 mm No 100000 h 360.0 mm 30.0 mm
QTP5 2X49
21.0 mm No 100000 h 360.0 mm 30.0 mm
QTP5 3X14,4X14
21.0 mm No 100000 h 280.0 mm 40.0 mm

Information about Family

If you need to install a new, or upgrade an existing lighting system with T5 lamps, the QUICKTRONIC PROFESSIONAL 5 ECG is a great option. It is available in several variants, so you can choose exactly the version you need for your own professional lighting project, and has an energy efficiency index of A2. Supply voltage is 220…250 V and line voltage is 198…264 V. You can use the QUICKTRONIC PROFESSIONAL 5 ECG with luminaires of protection classes I and II, in emergency lighting systems to EN 50172 / DIN VDE 0108-100, and it is good for industrial lighting, open plan office lighting, strip lighting, sports halls and factories. If you are modernizing an existing system, it is a great replacement ECG. Its cutoff technology gives this ECG excellent energy efficiency qualities, and it withstands frequent on/off switching.
Areas of application
  • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
  • Industry
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Sports halls and factories
  • Strip lighting
  • Suitable for emergency lighting (DC operation)
  • Modernization of existing systems
  • Suitable for luminaires of protection classes I and II
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads