QTP5 2X14…35

Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Perfect lamp start for applications with motion sensors
  • Automatic restart after lamp replacement
  • VDE/VDE EMC certified system
  • Very high energy efficiency due to cut-off technology
Areas of application
  • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
  • Industry
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Sports halls and factories
  • Strip lighting
  • Suitable for emergency lighting (DC operation)
  • Modernization of existing systems
  • Suitable for luminaires of protection classes I and II

Technical Data

Electrical data

Input voltage AC

198…264 V

Nominal voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage DC

176…276 V

Maximum output power

2 x 35 W

Efficiency in full-load

93 %

at 230 V, 50 Hz

Operating frequency

40…50 kHz

Max. ECG no. on circuit breaker 10 A (B)

12

Type B

Max. ECG no. on circuit breaker 16 A (B)

19

Type B

Inrush current

24 A

Light technical data

Starting time

1.0 s

If there is a temporary interruption in the power supply (< 0.5 s), the lamp will start within 0.3 s

Dimensions & weight

Length

360.0 mm

Width

30.0 mm

Height

21.0 mm

Mounting hole spacing, length

350.0 mm

Product weight

234.00 g

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

100000 h

At Tcase = 65°C at Tc point / 10% failure rate

Additional product data

Suitable for lamp power (2 lamps)

14…35 W

Capabilities

Suitable for fixtures with prot. class

I / II

End of lamp life safety shutdown

EOL T.2

Dimmable

No

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m / 1.0 m

Certificates & standards

Approval marks – approval

VDE / VDE-EMC / CE / ENEC 10

EEI – Energy Label

A2 BAT

Standards

Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547

Protection class

III

Type of protection

IP20

Logistical data

Commodity code

850410809000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

14-04-2022

Primary Article Identifier

4008321329073

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

f34cf195-92c9-4c59-911f-f214924088d2

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4008321329073 UNV

Unpacked

1 360mm x 30mm x 21mm 234.00g 0.23dm³
4008321329080 VS

Shipping box

20 370mm x 96mm x 170mm 4900.00g 6.04dm³

Downloads

Lamp-ECG Combination
HE 35 W

Nominal current

0.33 A

Nominal wattage + Power loss

75.00 W

Power factor λ [PIM]

0.98

Luminous flux at 35 °C

3300 lm

Number of lighting outlets

2

ECG_1.1 Ambient temperature for lifespan

40 °C

ECG_1.2 Ambient temperature for lifespan

50 °C

ECG_1.3 Ambient temperature for lifespan

60 °C

ECG_2.1 Tc point temperature for lifespa

55 °C

ECG_2.2 Tc point temperature for lifespa

65 °C

ECG_2.3 Tc point temperature for lifespa

70 °C

ECG_3.1 Temperature dependent lifespan

100000 h

ECG_3.2 Temperature dependent lifespan

100000 h

ECG_3.3 Temperature dependent lifespan

60000 h

Information about Family

If you need to install a new, or upgrade an existing lighting system with T5 lamps, the QUICKTRONIC PROFESSIONAL 5 ECG is a great option. It is available in several variants, so you can choose exactly the version you need for your own professional lighting project, and has an energy efficiency index of A2. Supply voltage is 220…250 V and line voltage is 198…264 V. You can use the QUICKTRONIC PROFESSIONAL 5 ECG with luminaires of protection classes I and II, in emergency lighting systems to EN 50172 / DIN VDE 0108-100, and it is good for industrial lighting, open plan office lighting, strip lighting, sports halls and factories. If you are modernizing an existing system, it is a great replacement ECG. Its cutoff technology gives this ECG excellent energy efficiency qualities, and it withstands frequent on/off switching.
Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • Energy Efficiency Index EEI: A2 BAT
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Safety: to EN 61347-2-3
  • Lamp operation: to EN 60929
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Height
Dimmable
ECG lifetime
Length
Width
Data sheet
QTP5 1X14…35
21.0 mm No 100000 h 280.0 mm 30.0 mm
QTP5 1X49
21.0 mm No 100000 h 280.0 mm 30.0 mm
QTP5 1X80
21.0 mm No 100000 h 360.0 mm 30.0 mm
QTP5 2X14…35
21.0 mm No 100000 h 360.0 mm 30.0 mm
QTP5 2X49
21.0 mm No 100000 h 360.0 mm 30.0 mm
QTP5 3X14,4X14
21.0 mm No 100000 h 280.0 mm 40.0 mm