QTP-D/E 2X10 13
Product family benefits
- Long lamp life
- No adverse effect from frequent on/off switching
- Automatic restart after lamp replacement
- Perfect lamp start for applications with motion sensors
- Separate installations thanks to optional cable clamp for K2 and K3 casings
- VDE/VDE EMC certified system
Areas of application
- Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
- Public buildings
- Sports halls and factories
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Input voltage AC
198 264 V
Nominal voltage
220 240 V
Mains frequency
50 60 Hz
Input voltage DC
176 276 V
Maximum output power
2 x 13 W
Efficiency in full-load
90 %
Operating frequency
44 kHz
Max. ECG no. on circuit breaker 10 A (B)
16
Max. ECG no. on circuit breaker 16 A (B)
28
Inrush current
20 A
Light technical data
Starting time
1.0 s
Dimensions & weight
Length
123.0 mm
Width
79.0 mm
Height
33.0 mm
Mounting hole spacing, length
111.0 mm
Mounting hole spacing, width
67.0 mm
Product weight
190.00 g
Cable cross-section, output side
0.5 1.5 mm²
Cable cross-section, input side
0.5 1.5 mm²
Temperatures & operating conditions
Ambient temperature range
-20 +50 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
50000 h
Additional product data
Suitable for lamp power (2 lamps)
10 13 W
Product remark
Optional cable clamp, see chapter ECG mountings - cable clamp
Capabilities
Suitable for fixtures with prot. class
I / II
End of lamp life safety shutdown
EOL T.2
Intended for no-load operation
No
Dimmable
No
Max. cable length to lamp/LED module
2.0 m / 1.0 m
Certificates & standards
Approval marks approval
VDE / VDE-EMC / ENEC 10 / GOST / RCM
EEI Energy Label
A2
Standards
Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547
Type of protection
IP20
Protection class
III
Logistical data
Commodity code
850410809000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4008321181596
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1296d641-d113-4b57-9ec7-9b1d2a76f1c5
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4008321181596 |
UNV
| 1 | 123mm x 79mm x 33mm | 190.00g | 0.32dm³ |
4008321181602 |
VS
| 20 | 428mm x 78mm x 257mm | 4017.67g | 8.58dm³ |
Downloads
Data sheets
Lamp-ECG Combination
DULUX D/E 10 W
Nominal current
0.09 A
Nominal wattage + Power loss
21.00 W
Power factor λ [PIM]
0.95
Luminous flux at 25 °C
2*600 lm
Number of lighting outlets
2
DULUX D/E 13 W
Nominal current
0.13 A
Nominal wattage + Power loss
29.00 W
Power factor λ [PIM]
0.95
Luminous flux at 25 °C
2*900 lm
Number of lighting outlets
2
DULUX S/E 11 W
Nominal current
0.12 A
Nominal wattage + Power loss
28.00 W
Power factor λ [PIM]
0.95
Luminous flux at 25 °C
950 lm
Number of lighting outlets
2
DULUX S/E 9 W
Nominal current
0.09 A
Nominal wattage + Power loss
18.00 W
Power factor λ [PIM]
0.92 c
Luminous flux at 25 °C
600 lm
Number of lighting outlets
2
Information about Family
If you need a high performance, energy efficient ECG to use with compact fluorescent lamps, the QUICKTRONIC PROFESSIONAL M, which is available in several variants, may be ideal. It gives you lamp start with optimum filament preheating, auto shutdown of defective lamps and at end of life, and an energy efficiency index of A2, and you can use it in emergency lighting systems to EN 50172 / DIN VDE 0108-100. Used with luminaires of protection class I, you may find it particularly useful for professional lighting systems in public buildings, sports halls and industrial lighting, including factories. QUICKTRONIC PROFESSIONAL M is a great addition to a light management system (LMS) and provides perfect lamp start for applications with motion sensors. Other benefits include its ability to resist frequent on/off switching, and long lamp life. You can install this ECG separately with the optional cable clamp for K2 and K3 casings.
Product family features
- Supply voltage: 220 240 V
- Line voltage: 198 264 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Lamp start with optimum filament preheating
- Energy Efficiency Index EEI: A2
- Automatic shutdown of defective lamps and at end of life (EoL T.2)
- Lamp operation: to EN 60929
- Safety: to EN 61347-2-3
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
QTP-D/E 2X10
13
|
33.0 mm | No | 50000 h | 123.0 mm | 79.0 mm | ||
![]() |
QTP-T/E 1X18,2X18
|
31.0 mm | No | 50000 h | 103.0 mm | 67.0 mm | ||
![]() |
QTP-T/E 1X26
42,2X26
|
31.0 mm | No | 50000 h | 103.0 mm | 67.0 mm | ||
![]() |
QTP-D/E 1X10
13
|
29.0 mm | No | 50000 h | 93.0 mm | 58.0 mm |