Products...
OSRAM Products...
Electronic Control Gears for Lamps...
ECG for fluorescent and compact fluorescent lamps...
ECG for FL and CFL, not dimmable...
QUICKTRONIC PROFESSIONAL M...

QTP-T/E 1X26…42,2X26

Back to family QUICKTRONIC PROFESSIONAL M
Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Automatic restart after lamp replacement
  • Perfect lamp start for applications with motion sensors
  • Separate installations thanks to optional cable clamp for K2 and K3 casings
  • VDE/VDE EMC certified system
Areas of application
  • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
  • Public buildings
  • Sports halls and factories
  • Suitable for luminaires of protection class I
Data sheet
More downloads

Technical Data

Electrical data

Input voltage AC

198…264 V

Nominal voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage DC

176…276 V

Maximum output power

2 x 26 W

Efficiency in full-load

93 %

at 230 V, 50 Hz

Operating frequency

40…50 kHz

Max. ECG no. on circuit breaker 10 A (B)

17

Type B

Max. ECG no. on circuit breaker 16 A (B)

28

Type B

Light technical data

Starting time

1.0 s

Dimensions & weight

Length

103.0 mm

Width

67.0 mm

Height

31.0 mm

Mounting hole spacing, length

94.0 mm

Mounting hole spacing, width

57.0 mm

Product weight

148.50 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h

At Tcase = 75°C at Tc point / 10% failure rate

Additional product data

Suitable for lamp power (2 lamps)

26 W

Product remark

Optional cable clamp, see chapter ECG mountings - cable clamp

Suitable for lamp power (1 lamp)

26…42 W

Capabilities

Suitable for fixtures with prot. class

I / II

End of lamp life safety shutdown

EOL T.2

Intended for no-load operation

No

Dimmable

No

Max. cable length to lamp/LED module

2.0 m / 1.0 m

Certificates & standards

Approval marks – approval

VDE / ENEC 10 / VDE-EMC / GOST / RCM

EEI – Energy Label

A2 BAT

Standards

Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547

Type of protection

IP20

Protection class

III

Logistical data

Commodity code

850410809000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

19-05-2023

Primary Article Identifier

4008321537089

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

c6d7d3e6-9e24-4c06-961f-37ae1c7b051c

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume
4008321537089 UNV

Unpacked

 1 103mm x 67mm x 31mm 149.00g 0.21dm³
4008321537096 VS

Shipping box

 20 355mm x 96mm x 220mm 3192.00g 7.50dm³

Downloads

Data sheets

Family data sheet
Data sheet
QUICKTRONIC QTP D E QTP T E

User instruction

Size: 2.3 MB
334954_ENEC-Marks approval

Certificates

Size: 972.5 kB
334956_EMC-Marks approval – QTP-M

Certificates

Size: 962.2 kB
335169_Manufacturer´s declaration – Lamp/ECG combinations: Frequent switching

Certificates

Size: 32 kB
504181_VDE-EMC-Certificate QTP DL_TE

Certificates

Size: 673.7 kB
QUICKTRONIC CE 3364256 190821

Declarations of conformity

Size: 1.6 MB
QUICKTRONIC UK DoC 4314635 200821

Mandatory Publications

Size: 116.3 kB
Lamp-ECG Combination
DULUX D/E 26 W

Nominal current

0.24 A

Nominal wattage + Power loss

54.00 W

Power factor λ [PIM]

0.98

Luminous flux at 25 °C

2*1750 lm

Number of lighting outlets

2

DULUX D/E 26 W/830
DULUX D/E 26 W/840
DULUX D/E 26 W

Nominal current

0.13 A

Nominal wattage + Power loss

28.00 W

Power factor λ [PIM]

0.95

Luminous flux at 25 °C

1750 lm

Number of lighting outlets

1

ECG_1.1 Ambient temperature for lifespan

40 °C

ECG_1.2 Ambient temperature for lifespan

50 °C

ECG_1.3 Ambient temperature for lifespan

60 °C

ECG_2.1 Tc point temperature for lifespa

55 °C

ECG_2.2 Tc point temperature for lifespa

65 °C

ECG_2.3 Tc point temperature for lifespa

70 °C

ECG_3.1 Temperature dependent lifespan

100000 h

ECG_3.2 Temperature dependent lifespan

100000 h

ECG_3.3 Temperature dependent lifespan

60000 h

DULUX D/E 26 W/830
DULUX D/E 26 W/840
DULUX T/E 26 W

Nominal current

0.24 A

Nominal wattage + Power loss

54.00 W

Power factor λ [PIM]

0.98

Luminous flux at 25 °C

1750 lm

Number of lighting outlets

2

ECG_1.1 Ambient temperature for lifespan

40 °C

ECG_1.2 Ambient temperature for lifespan

50 °C

ECG_1.3 Ambient temperature for lifespan

60 °C

ECG_2.1 Tc point temperature for lifespa

55 °C

ECG_2.2 Tc point temperature for lifespa

65 °C

ECG_2.3 Tc point temperature for lifespa

70 °C

ECG_3.1 Temperature dependent lifespan

100000 h

ECG_3.2 Temperature dependent lifespan

100000 h

ECG_3.3 Temperature dependent lifespan

60000 h

DULUX T/E PLUS 26 W/830
DULUX T/E PLUS 26 W/840
DULUX T/E 42 W

Nominal current

0.20 A

Nominal wattage + Power loss

45.00 W

Power factor λ [PIM]

0.95

Luminous flux at 25 °C

3200 lm

Number of lighting outlets

1

ECG_1.1 Ambient temperature for lifespan

40 °C

ECG_1.2 Ambient temperature for lifespan

50 °C

ECG_1.3 Ambient temperature for lifespan

60 °C

ECG_2.1 Tc point temperature for lifespa

55 °C

ECG_2.2 Tc point temperature for lifespa

65 °C

ECG_2.3 Tc point temperature for lifespa

70 °C

ECG_3.1 Temperature dependent lifespan

100000 h

ECG_3.2 Temperature dependent lifespan

100000 h

ECG_3.3 Temperature dependent lifespan

60000 h

DULUX T/E PLUS 42 W/830
DULUX T/E PLUS 42 W/840

Information about Family

If you need a high performance, energy efficient ECG to use with compact fluorescent lamps, the QUICKTRONIC PROFESSIONAL M, which is available in several variants, may be ideal. It gives you lamp start with optimum filament preheating, auto shutdown of defective lamps and at end of life, and an energy efficiency index of A2, and you can use it in emergency lighting systems to EN 50172 / DIN VDE 0108-100. Used with luminaires of protection class I, you may find it particularly useful for professional lighting systems in public buildings, sports halls and industrial lighting, including factories. QUICKTRONIC PROFESSIONAL M is a great addition to a light management system (LMS) and provides perfect lamp start for applications with motion sensors. Other benefits include its ability to resist frequent on/off switching, and long lamp life. You can install this ECG separately with the optional cable clamp for K2 and K3 casings.
Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Energy Efficiency Index EEI: A2
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Lamp operation: to EN 60929
  • Safety: to EN 61347-2-3
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Height
Dimmable
ECG lifetime
Length
Width 		Data sheet
QTP-D/E 2X10…13
 		33.0 mm No 50000 h 123.0 mm 79.0 mm
QTP-T/E 1X18,2X18
 		31.0 mm No 50000 h 103.0 mm 67.0 mm
QTP-T/E 1X26…42,2X26
 		31.0 mm No 50000 h 103.0 mm 67.0 mm
QTP-D/E 1X10…13
 		29.0 mm No 50000 h 93.0 mm 58.0 mm