QT-FQ 2X80
Product family benefits
- Long lamp life
- No adverse effect from frequent on/off switching
- Automatic restart after lamp replacement
- Perfect lamp start for applications with motion sensors
- VDE/VDE EMC certified system
- Very high energy efficiency due to cut-off technology
Areas of application
- Industry
- Open-plan offices, corridors and storage rooms
- Public buildings
- Sports halls and factories
- Strip lighting
- Modernization of existing systems
Technical Data
Electrical data
Input voltage AC
198…264 V
Nominal voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage DC
-
Maximum output power
2 x 80 W
Efficiency in full-load
96 %
Operating frequency
70…75 kHz
Max. ECG no. on circuit breaker 10 A (B)
5
Max. ECG no. on circuit breaker 16 A (B)
9
Inrush current
39 A
Light technical data
Starting time
1.0 s
Dimensions & weight
Length
424.0 mm
Width
30.0 mm
Height
21.0 mm
Mounting hole spacing, length
415.0 mm
Product weight
381.00 g
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 h
Additional product data
Suitable for lamp power (2 lamps)
80 W
Capabilities
End of lamp life safety shutdown
EOL T.2
Suitable for fixtures with prot. class
I / II
Intended for no-load operation
No
Dimmable
No
Max. cable length to lamp/LED module
1.5 m
Certificates & standards
Approval marks – approval
VDE / VDE-EMC / ENEC 10 / GOST / RCM
EEI – Energy Label
A2
Standards
Acc. to EN 55015, CISPR 15/Acc. to EN 61547/IEC 61547/Acc. to EN 61000-3-2/IEC 61000-3-2/Acc. to EN 61347-2-3/IEC 61347-2-3
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
85041080900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4050300825564
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
cfd68c72-2dae-418d-a25d-b2c7f4225c7a
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4050300825564 |
UNV
| 1 | |||
| 4050300825571 |
VS
| 20 | 435mm x 170mm x 96mm | 8241.00g | 7.10dm³ |
Downloads
Data sheets
Lamp-ECG Combination
DULUX L 55 W
Nominal current
0.59 A
Nominal wattage + Power loss
122.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
4800 lm
Number of lighting outlets
2
DULUX L 80 W
Nominal current
0.76 A
Nominal wattage + Power loss
175.00 W
Power factor λ [PIM]
0.99
Luminous flux at 35 °C
6150 lm
Number of lighting outlets
2
HO 80 W
Nominal current
0.76 A
Nominal wattage + Power loss
175.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
6300 lm
Number of lighting outlets
2
ECG_1.1 Ambient temperature for lifespan
40 °C
ECG_1.2 Ambient temperature for lifespan
50 °C
ECG_1.3 Ambient temperature for lifespan
60 °C
ECG_2.1 Tc point temperature for lifespa
60 °C
ECG_2.2 Tc point temperature for lifespa
70 °C
ECG_2.3 Tc point temperature for lifespa
75 °C
ECG_3.1 Temperature dependent lifespan
100000 h
ECG_3.2 Temperature dependent lifespan
80000 h
ECG_3.3 Temperature dependent lifespan
50000 h
Information about Family
If you want to install light using high efficiency 16 mm fluorescent lamps, the QUICKTRONIC FQ ECG is a great choice. It features lamp start with optimum filament preheating, a long lifespan, energy efficiency index of A2 and the automatic shutoff of defective lamps and at end of life. You can use it as an ECG replacement when you modernize systems, or in a new LMS; use it for strip lighting, industrial lighting including factories, in sports halls and open plan office lighting, as well as in corridors and storage rooms. Its VDE/VDE MC certified system gives you durable, reliable performance that can resist frequent on/off switching and exhibits very high energy efficiency thanks to its cutoff technology. The QUICKTRONIC FQ also provides perfect lamp starts for applications with motion sensors, and enhanced lamp life.
Product family features
- Supply voltage: 220…240 V
- Line voltage: 198…264 V
- Line frequency: 50 Hz | 60 Hz
- Lamp start with optimum filament preheating
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- Energy Efficiency Index EEI: A2
- Safety: to EN 61347-2-3
- Automatic shutdown of defective lamps and at end of life (EoL T.2)
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
QT-FQ 2X80
|
21.0 mm | No | 50000 h | 424.0 mm | 30.0 mm |