QTi 4X14/24 DIM

Product family benefits
  • Same luminous flux with direct and alternating current
  • Perfect lamp start for applications with motion sensors
  • Dimming of amalgam lamps without flickering or reduced lifespan
  • Very high efficiency thanks to cut-off technology
  • Automatic restart after lamp replacement
  • ECGs comply with MINERGIE standard due to very low standby consumption
  • Configurable emergency power characteristics
Areas of application
  • Suitable for emergency installations
  • Industry
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Suitable for luminaires of protection class I

Technical Data

Electrical data

Input voltage AC

198…264 V

Nominal voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage DC

154…276 V

Maximum output power

4 x 24 W

Efficiency in full-load

94 %

at 230 V, 50 Hz

Operating frequency

40…100 kHz

Max. ECG no. on circuit breaker 10 A (B)

8

Type B

Max. ECG no. on circuit breaker 16 A (B)

13

Type B

Inrush current

45 A

Light technical data

Starting time

0.6 s

Optimized preheat start

Dimensions & weight

Length

360.0 mm

Width

40.0 mm

Height

21.0 mm

Mounting hole spacing, length

350.0 mm

Product weight

397.00 g

Cable cross-section, output side

0.5…1.5 / 0.5…1.0 mm²

Solid leads / Flexible

Cable cross-section, input side

0.5…1.5 / 0.5…1.0 mm²

Solid leads / Flexible

Temperatures & operating conditions

Ambient temperature range

+10…+50 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

100000 h

At Tcase = 65°C at Tc point / 10% failure rate

Additional product data

Suitable for lamp power (4 lamps)

14…24 W

Capabilities

Dimming interface

1…10 V

Dimming range

1…100 %

Luminous flux

Dimmable

Yes

Overheating protection

Power reduction and switch off at T > 75 °C at the tc point

Suitable for fixtures with prot. class

I

End of lamp life safety shutdown

EOL T.2

Intended for no-load operation

No

Max. cable length to lamp/LED module

1.0 m

Certificates & standards

Approval marks – approval

VDE / VDE-EMC / EL / EAC / RCM / CCC

Standards

Acc. to EN 55015; EN 55022/Acc. to EN 61547/Acc. to EN 61000-3-2

Protection class

I

EEI – Energy Label

A1 BAT

Type of protection

IP20

Logistical data

Commodity code

85041080900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

21-07-2023

Primary Article Identifier

4008321069993

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

12980ffa-8acc-4e8e-b001-5b978bf0ec35

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4008321069993 UNV

Unpacked

1
4008321070005 VS

Shipping box

20 380mm x 206mm x 96mm 8213.00g 7.51dm³

Downloads

Lamp-ECG Combination
DULUX F 24 W

Nominal current

0.43 A

Nominal wattage + Power loss

97.60 W

Power factor λ [PIM]

0.99

Luminous flux at 35 °C

1800 lm

Ambient temperature range [PIM] REM

Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.

Number of lighting outlets

4

DULUX L 24 W

Nominal current

0.43 A

Nominal wattage + Power loss

98.00 W

Power factor λ [PIM]

0.99

Luminous flux at 35 °C

1800 lm

Ambient temperature range [PIM] REM

Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.

Number of lighting outlets

4

FC 22 W

Nominal current

0.43 A

Nominal wattage + Power loss

98.00 W

Power factor λ [PIM]

0.99

Luminous flux at 35 °C

1750 lm

Ambient temperature range [PIM] REM

Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.

Number of lighting outlets

4

HE 14 W

Nominal current

0.27 A

Nominal wattage + Power loss

60.40 W

Power factor λ [PIM]

0.97

Luminous flux at 35 °C

1200 lm

Ambient temperature range [PIM] REM

Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.

Number of lighting outlets

4

HO 24 W

Nominal current

0.43 A

Nominal wattage + Power loss

98.00 W

Power factor λ [PIM]

0.99

Luminous flux at 35 °C

1750 lm

Ambient temperature range [PIM] REM

Operation at up to -20 °C for all QTi (DALI) DIM-ECG possible. Lowest dimming position must be limited. Details see technical dimming brochure.

Number of lighting outlets

4

Information about Family

Product family features
  • Control via 1…10 V interface
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • Dimming range: 1…100 % luminous flux
  • Lamp start: within 0.6 s
  • Lifetime: > 100,000 h (for T = 65 °C at Tc)
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Energy Efficiency Index EEI: A1 BAT
  • Overtemperature protection: Thermal management at high tc temperatures
  • Safety: to EN 61347-2-3
  • Lamp operation: to EN 60929
  • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Height
Width
Dimmable
Dimming interface
Dimming range
Data sheet
QTi 1X14/24 DIM
21.0 mm 30.0 mm Yes 1…10 V 1…100 %
QTi 2X14/24 DIM
21.0 mm 30.0 mm Yes 1…10 V 1…100 %
QTi 2X21/39 DIM
21.0 mm 30.0 mm Yes 1…10 V 1…100 %
QTi 3X14/24 DIM
21.0 mm 40.0 mm Yes 1…10 V 1…100 %
QTi 4X14/24 DIM
21.0 mm 40.0 mm Yes 1…10 V 1…100 %