QTP-FC 1X55

Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Automatic restart after lamp replacement
  • Perfect lamp start for applications with motion sensors
  • Separate installations thanks to optional cable clamp for K2 and K3 casings
  • VDE/VDE EMC certified system
Areas of application
  • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Suitable for luminaires of protection class I

Technical Data

Electrical data

Input voltage AC

198…264 V

Nominal voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage DC

176…264 V

Maximum output power

55 W

Efficiency in full-load

93 %

at 230 V, 50 Hz

Operating frequency

40…50 kHz

Max. ECG no. on circuit breaker 10 A (B)

11

Type B

Max. ECG no. on circuit breaker 16 A (B)

19

Type B

Light technical data

Starting time

1.0 s

If there is a temporary interruption in the power supply (< 0.5 s), the lamp will start within 0.3 s

Dimensions & weight

Length

103.0 mm

Width

67.0 mm

Height

31.0 mm

Mounting hole spacing, length

94.0 mm

Mounting hole spacing, width

67.0 mm

Product weight

135.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h

At Tcase = 75°C at Tc point / 10% failure rate

Additional product data

Suitable for lamp power (1 lamp)

55 W

Capabilities

Suitable for fixtures with prot. class

I / II

End of lamp life safety shutdown

EOL T.2

Max. cable length to lamp/LED module

2.0 m / 1.0 m

Dimmable

No

Intended for no-load operation

No

Certificates & standards

Approval marks – approval

VDE / VDE-EMC / ENEC 10 / GOST / RCM

EEI – Energy Label

A2 BAT

Standards

Acc. to EN 61347-2-3/IEC 61347-2-3/Acc. to EN 55015:2006 + A1:2007/CISPR 15/Acc. to EN 61000-3-2/IEC 61000-3-2/Acc. to EN 61547/IEC 61547

Protection class

III

Type of protection

IP20

Logistical data

Commodity code

850410809000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

14-04-2022

Primary Article Identifier

4008321537041

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

9f8915c7-3e9b-496c-a171-a23be636c6d3

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4008321537041 UNV

Unpacked

1 103mm x 67mm x 31mm 135.00g 0.21dm³
4008321537058 VS

Shipping box

20 355mm x 96mm x 220mm 3240.33g 7.50dm³

Downloads

Information about Family

The QUICKTRONIC electronic control gear (ECG) for T5 circular lamps has an energy efficiency index of A2 BAT and gives you the reassurance of automatic lamp shutdown in the event of unit defect or failure. You can use it in emergency lighting systems in accordance with EN 50172 / DIN VDE 0108-100 and it is good for office lighting, public buildings, corridors and storage rooms, with luminaires of protection class I. An optional cable clamp is available for use with K2 and K3 casings that permits separate installations, and QUICKTRONIC gives you perfect lamp start for applications with motion sensors. It suffers no harm from frequent on / off switching and automatically restarts after lamp replacement.
Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Energy Efficiency Index EEI: A2 BAT
  • Automatic shutdown of defective lamps and at end of life (EoL)
  • Lamp operation: to EN 60929
  • Safety: to EN 61347-2-3
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Height
Dimmable
ECG lifetime
Length
Width
Data sheet
QTP-FC 1X55
31.0 mm No 50000 h 103.0 mm 67.0 mm