QTP-FC 1X55
Product family benefits
- Long lamp life
- No adverse effect from frequent on/off switching
- Automatic restart after lamp replacement
- Perfect lamp start for applications with motion sensors
- Separate installations thanks to optional cable clamp for K2 and K3 casings
- VDE/VDE EMC certified system
Areas of application
- Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
- Open-plan offices, corridors and storage rooms
- Public buildings
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Input voltage AC
198…264 V
Nominal voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage DC
176…264 V
Maximum output power
55 W
Efficiency in full-load
93 %
Operating frequency
40…50 kHz
Max. ECG no. on circuit breaker 10 A (B)
11
Max. ECG no. on circuit breaker 16 A (B)
19
Light technical data
Starting time
1.0 s
Dimensions & weight
Length
103.0 mm
Width
67.0 mm
Height
31.0 mm
Mounting hole spacing, length
94.0 mm
Mounting hole spacing, width
67.0 mm
Product weight
135.00 g
Cable cross-section, output side
0.5…1.5 mm²
Cable cross-section, input side
0.5…1.5 mm²
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 h
Additional product data
Suitable for lamp power (1 lamp)
55 W
Capabilities
End of lamp life safety shutdown
EOL T.2
Suitable for fixtures with prot. class
I / II
Dimmable
No
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m / 1.0 m
Certificates & standards
Approval marks – approval
VDE / VDE-EMC / ENEC 10 / GOST / RCM
EEI – Energy Label
A2 BAT
Standards
Acc. to EN 61347-2-3/IEC 61347-2-3/Acc. to EN 55015:2006 + A1:2007/CISPR 15/Acc. to EN 61000-3-2/IEC 61000-3-2/Acc. to EN 61547/IEC 61547
Protection class
III
Type of protection
IP20
Logistical data
Commodity code
85041080900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-05-2023
Primary Article Identifier
4008321537041
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
a253df47-86c6-4ecc-adfe-e332bbf7495c
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4008321537041 |
UNV
| 1 | 103mm x 67mm x 31mm | 135.00g | 0.21dm³ |
| 4008321537058 |
VS
| 20 | 355mm x 96mm x 220mm | 3240.33g | 7.50dm³ |
Downloads
Lamp-ECG Combination
DULUX L 55 W
Nominal current
0.26 A
Nominal wattage + Power loss
59.00 W
Power factor λ [PIM]
0.98
Luminous flux at 35 °C
4800 lm
Number of lighting outlets
1
Information about Family
The QUICKTRONIC electronic control gear (ECG) for T5 circular lamps has an energy efficiency index of A2 BAT and gives you the reassurance of automatic lamp shutdown in the event of unit defect or failure. You can use it in emergency lighting systems in accordance with EN 50172 / DIN VDE 0108-100 and it is good for office lighting, public buildings, corridors and storage rooms, with luminaires of protection class I. An optional cable clamp is available for use with K2 and K3 casings that permits separate installations, and QUICKTRONIC gives you perfect lamp start for applications with motion sensors. It suffers no harm from frequent on / off switching and automatically restarts after lamp replacement.
Product family features
- Supply voltage: 220…240 V
- Line voltage: 198…264 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Lamp start with optimum filament preheating
- Energy Efficiency Index EEI: A2 BAT
- Automatic shutdown of defective lamps and at end of life (EoL)
- Lamp operation: to EN 60929
- Safety: to EN 61347-2-3
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
QTP-FC 1X55
|
31.0 mm | No | 50000 h | 103.0 mm | 67.0 mm |