TF300-G1-830-05
Product family benefits
- Pre-wired LED strip, simple and quick plug-and-play installation
- Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
- Type of protection: IP00
- Dimmable (with suitable PWM dimming methods)
Areas of application
- For use in architectural, shop and interior luminaires
- Offices, corridors and residential interiors
- Architectural Integration – e.g. coves, walls
Equipment / Accessories
- Simplified connection with optional matching CONNECTsystem
- Flexessories: a complete set of aluminum channels with diffusers and lenses
- Drivers and dimmers: wide selection of OPTOTRONIC 24 V DALI, DMX and BLE
Technical Data
Electrical data
Nominal voltage
24.0 V
Type of current
DC
Nominal wattage per meter
2.8 W
Rated wattage
14.00 W
Input voltage range
23…25 V
Accidental reverse input voltage protection up to
25 V
Photometrical data
Light color LED
White
Color rendering index Ra
80
Luminous flux per meter
360 lm
Total useful luminous flux
1800 lm
Standard deviation of color matching
≤3 sdcm
Light color (designation)
White
Color temperature
3080 K
Light technical data
LED pitch
14.29 mm
Rated beam angle (half peak value)
120.00 °
Starting time
< 0.5 s
Warm-up time (60 %)
0.00 s
LED module information
Number of LEDs per meter
70
Number of LEDs per smallest unit
7
Dimensions & weight
Length
5000 mm
Length – smallest unit
100.0 mm
Width
8.00 mm
Height
1.50 mm
Product weight
60.00 g
Cable cross-section, input side
0.5 mm²
Temperatures & operating conditions
Performance temp. acc. to IEC 62717
30 °C
Temperature range in operation at Tc point
-25…80 °C
Ambient temperature range
-25…+50 °C
Temperature range at storage
-30…85 °C
Lifespan
Rated lamp life time
50000 h
Nominal lamp life time
50000 h
Lumen main.fact.at end of nom.life time
0.70
Number of switching cycles
30000
Additional product data
Predecessor EAN
4052899527898, 4052899527973
ID of contained light source
LS_SHZ_600302
Capabilities
Dimmable
Yes
Lowest bending radius
20 mm
Certificates & standards
Energy consumption
16 kWh/1000h
Standards
CE/EAC/ENEC
Type of protection
IP00
Energy efficiency class of the contained light source
E
Logistical data
Commodity code
940542319000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
13-05-2022
Primary Article Identifier
4062172107044
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172107044 |
BT
| 1 | |||
| 4062172107051 |
VS
| 10 | 225mm x 240mm x 120mm | 1254.00g | 6.48dm³ |
Downloads
Data sheets
Tools
Discontinued Products
Find here an overview of our discontinued portfolios To the discontinued products overview
Find here an overview of our discontinued portfolios To the discontinued products overview
Accessories optional
Information about Family
Product family features
- Flexible and cuttable LED strip
- Luminous flux: up to 300 lm/m
- Available with color temperature: 2,700K, 3,000 K, 4,000 K, 5,000 K or 6,500 K
- Up to 50,000 hrs lifetime @ tc max
- Recommended in system use with OPTOTRONIC
- Color consistency in 3 SDCM
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|
|
|
TF300-G1-827-05
|
2740 K | 80 | 350 lm | 2.8 W | ||
|
|
TF300-G1-830-05
|
3080 K | 80 | 360 lm | 2.8 W | ||
|
|
TF300-G1-840-05
|
4070 K | 80 | 370 lm | 2.8 W | ||
|
|
TF300-G1-850-05
|
5160 K | 80 | 380 lm | 2.8 W | ||
|
|
TF300-G1-865-05
|
6780 K | 80 | 370 lm | 2.8 W |
