Product family benefits
  • Pre-wired LED strip, simple and quick plug-and-play installation
  • Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
  • Type of protection: IP66
  • Dimmable (with suitable PWM dimming methods)
Areas of application
  • For use in architectural, shop and interior luminaires
  • Offices, corridors and residential interiors
  • Architectural Integration – e.g. coves, walls
  • Wet or damp areas
Equipment / Accessories
  • Simplified connection with optional matching CONNECTsystem
  • Flexessories: a complete set of aluminum channels with diffusers and lenses
  • Drivers and dimmers: wide selection of OPTOTRONIC 24 V DALI, DMX and BLE

Technical Data

Electrical data

Nominal voltage

24.0 V

Type of current


Nominal wattage per meter

2.8 W

Rated wattage

14.00 W

Input voltage range

23…25 V

Accidental reverse input voltage protection up to

25 V

Photometrical data

Light color LED


Color rendering index Ra


Luminous flux per meter

350 lm

Total useful luminous flux

1750 lm

Standard deviation of color matching

≤3 sdcm

Light color (designation)


Color temperature

3030 K

Light technical data

LED pitch

14.29 mm

Starting time

< 0.5 s

Warm-up time (60 %)

0.00 s

LED module information

Number of LEDs per meter


Number of LEDs per smallest unit


Dimensions & weight


5000 mm

Length – smallest unit

100.0 mm


11.1 mm


4.10 mm

Product weight

269.00 g

Cable cross-section, input side

0.5 mm²

Temperatures & operating conditions

Performance temp. acc. to IEC 62717

30 °C

Temperature range in operation at Tc point

-25…80 °C

Ambient temperature range

-25…+50 °C

Temperature range at storage

-30…85 °C


Rated lamp life time

50000 h

Nominal lamp life time

50000 h

Lumen end of time


Number of switching cycles


Additional product data

Predecessor EAN

4052899528055, 4052899528130

ID of contained light source [GMS]



Lowest bending radius

20 mm

Certificates & standards

Energy consumption

16 kWh/1000h



Type of protection


Energy efficiency class of the contained light source


Logistical data

Commodity code


Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration


Primary Article Identifier


Candidate List Substance 1

No declarable substances contained

Declaration No. in SCIP database

No declarable substances contained

Packaging information




Dimension l x w x h



4062172106641 BT


1 280mm x 265mm x 17mm 306.00g 1.26dm³
4062172106658 VS

Shipping box

10 280mm x 305mm x 180mm 3664.00g 15.37dm³



Accessories optional

Information about Family

Product family features
  • Flexible and cuttable LED strip
  • Luminous flux: up to 300 lm/m
  • Available with color temperature: 2,700K, 3,000 K, 4,000 K, 5,000 K or 6,500 K
  • Up to 50,000 hrs lifetime @ tc max
  • Recommended in system use with OPTOTRONIC
  • Color consistency in 3 SDCM
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.


Sort by:
Color temperature
Color rendering index Ra
Luminous flux per meter
Nominal wattage per meter
Data sheet
2700 K 80 340 lm 2.8 W
3030 K 80 350 lm 2.8 W
4000 K 80 360 lm 2.8 W
5050 K 80 370 lm 2.8 W
6560 K 80 360 lm 2.8 W