Touch DIM LS/PD LI
.jpg)
.jpg)
Product family benefits
- A setpoint for daylight-dependent control can be stored by double clicking
- Operated via standard switches
Areas of application
- Single luminaires in office areas
Equipment / Accessories
- Suitable for up to 4 QTi DALI ECG or 4 HTi DALI transformers or 4 OTi DALI LED drivers
Technical Data
Electrical data
System wattage
0.50 W
Nominal voltage
220…240 V
Mains frequency
50 Hz
Dimensions & weight
Length
63.0 mm
Width
29.0 mm
Height
21.0 mm
Product weight
24.00 g
Colors & materials
Product color
Anthracite
Temperatures & operating conditions
Ambient temperature range
0…+50 °C
Capabilities
Dimmable
No
Dimming interface
Touch DIM
Maximum installation height
4 m
Detection angle
80 °
Operating range, light sensor
10…350 lx
Number of control outputs
1
Type of installation
Luminaire integration
Certificates & standards
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
85365080900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4008321023025
Candidate List Substance 1
Lead titanium zirconium oxide
CAS No. of substance 1
12626-81-2
Candidate List Substance 2
Lead
CAS No. of substance 2
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
fbb1ddd9-7c0d-4e10-8ef6-336ac2dd5106
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4008321023025 |
FS
| 1 | |||
| 4008321023032 |
VS
| 25 | 217mm x 217mm x 180mm | 1085.00g | 8.48dm³ |
Downloads
Data sheets
Information about Family
If your light management system (LMS) needs a light detection and presence sensor, the Touch DIM LS/PD LI is an excellent choice. Suitable for up to 4 QTi DALI ECG or 4 HTi DALI transformers or 4 OTi DALI LED drivers, it has a delay time of 15 min and if you prefer, can be used solely as a presence sensor. Ideal for use with single luminaires in office lighting, you can store a setpoint for daylight-dependent control simply by double clicking. The Touch DIM LS/PD LI is operated via standard switches.
Product family features
- Touch DIM light and presence sensor
- Can also be operated purely as a presence sensor
- Maximum signal line length: 10 m
- Maximum power input: 0.5 W
- Delay time: 15 min
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
Touch DIM LS/PD LI
|
Luminaire integration | No | 1 | Touch DIM | 80 ° |