CONN-FLEX-3P-050 KIT 10PCS

Product family benefits
  • Simple installation, no tools or soldering required (CONNECTsystem)
  • Reduced installation time (CONNECTsystem)
  • Can be connected to the front of the module or at division points (CONNECTsystem)
  • Low profile (CONNECTsystem)

Technical Data

Dimensions & weight

Length

519.3 mm

Product weight

13.82 g

Height

4.0 mm

Width

10.4 mm

Additional product data

Predecessor EAN

4052899483026, 4052899482999

Logistical data

Commodity code

85366990990

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

22-04-2022

Primary Article Identifier

4062172179690

Candidate List Substance 1

No declarable substances contained

Declaration No. in SCIP database

No declarable substances contained

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172179690 FS

Folding box

1 254mm x 160mm x 70mm 142.00g 2.84dm³
4062172179706 VS

Shipping box

10 337mm x 270mm x 400mm 2093.00g 36.35dm³

Downloads

Information about Family

Product family features
  • Quick and easy installation
  • Compatible with Linearlight Flex
  • Compatible with TEC Flex
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products