CV Power supplies 24 V with 1…10 V
Product family features
- DC mode functionality
- Type of protection: IP66 and IP67
- Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
- Wide operating temperature range: -30…+55 °C
- Lifetime: up to 50,000 h (temperature at max. tc )
- Dimmable via fully isolated 1…10 V interface
Product family benefits
- Large range of products from 20 W to 250 W
- Installation in very cold and hot environments
- Very stable output power
- High electronical reversible short-circuit, overload, overtemperature protection
- Smart Power Supply: boosting power to turn on cold LEDs
- Independent installation possible
- Dimming range: 1…100 %
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
OT 20/220…240/24 DIM P
|
20 W | Yes | 1780 mm | 430 mm | 250 mm | ||
|
OT 40/220…240/24 DIM P
|
40 W | Yes | 2080 mm | 430 mm | 260 mm | ||
|
OT 60/220…240/24 DIM P
|
60 W | Yes | 2080 mm | 430 mm | 260 mm | ||
|
OT 100/220…240/24 DIM P
|
100 W | Yes | 2400 mm | 500 mm | 340 mm | ||
|
OT 130/220…240/24 DIM P
|
130 W | Yes | 2200 mm | 630 mm | 370 mm | ||
|
OT 250/220…240/24 DIM P
|
250 W | Yes | 2650 mm | 680 mm | 400 mm |
Information about Family
Free yourself to design and install optimized, innovative, unique lighting design and luminaires, even in tight and flat light fittings or in sites such as suspended ceilings, with your choice of compact constant voltage supply from the OPTOTRONIC OT 80/220…240/24 DIM P range of CV Power supplies 24 V with 1…10 V. Dimmable via a fully isolated 1…10 V interface, they are suitable for use in SELV installations both inside and outside and have an output power range of up to 240 W.
Areas of application
- Facades, public squares, cruise ships
- Signage
- Suitable for indoor and outdoor installations
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.