LS/PD LT2 LI UF
Product family benefits
- A setpoint for daylight-dependent control can be stored by double clicking
- Operated via standard switches or integrated push button
- Extremely low profile
- Presence detection range can be restricted by snap on shutters
Areas of application
- Single luminaires in office areas
Equipment / Accessories
- Suitable for up to 2 OTi DALI Ultraflat LED drivers
Technical Data
Electrical data
Mains frequency
1 Hz
Nominal voltage
5.00 V
Dimensions & weight
Length
50.0 mm
Width
21.0 mm
Height
16.0 mm
Product weight
10.00 g
Colors & materials
Product color
White
Temperatures & operating conditions
Ambient temperature range
-20 +50 °C
Capabilities
Dimmable
No
Dimming interface
LEDset
Maximum installation height
4 m
Detection angle
90 °
Type of installation
Luminaire integration
Number of control outputs
2
Detection area
36 m²
Certificates & standards
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
85365019900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
04-10-2023
Primary Article Identifier
4052899984615
Declaration No. in SCIP database
In work
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899984615 |
BT
| 1 | |||
4052899984639 |
VS
| 10 | 390mm x 95mm x 75mm | 253.00g | 2.78dm³ |
Downloads
Information about Family
Using the LS/PD LT2 LI UF sensor with your lighting management system (LMS) provides many benefits. This extremely low profile unit requires little space, and you can use it either as a TouchDIM light and presence sensor with an LEDset interface connection, solely as a light sensor, or purely as a presence sensor. You can use it with up to 2 OTi DALI Ultraflat LED drivers, and it is ideal for single luminaires in office lighting. The LS/PD LT2 LI UF sensor lets you store a setpoint for daylight-dependent control with a double click, and you can operate it using standard switches or the integrated pushbutton. You can also use snap-on shutters to restrict the presence detection range.
Product family features
- Touch DIM light and presence sensor for LEDset interface connection
- Can also be used purely as a light sensor or purely as a presence sensor
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
LS/PD LT2 LI UF
|
Luminaire integration | No | LEDset | 90 ° | 4 m |