BackLED M Plus G4

Product family benefits
  • Good uniformity and less module density thanks to unique Square Optical Lens design
  • Consistent white light (Standard Deviation of Color Matching SDCM: < 3)
  • Color rendering index Ra: 80
  • Completely molded housing protects PCB and LEDs
  • Easier pre-mounting with double-sided tape with extra long foil

Products

Sort by:
Product
Color temperature
Color rendering index Ra
Luminous flux per LED module
Nominal wattage per LED module
Luminous efficacy
Data sheet
BA-M-CP-865 G4
6500 K ≥80 82 lm 0.72 W 113.9 lm/W
BA-M-CP-840 G4
4000 K ≥80 82 lm 0.72 W 113.9 lm/W
BA-M-CP-830 G4
3000 K ≥80 78 lm 0.72 W 108.3 lm/W
BA-M-CP-RED G4
21.5 lm 0.6 W 35.8 lm/W
BA-M-CP-BLUE G4
9 lm 0.6 W 15 lm/W

Information about Family

Areas of application
  • Backlighting of medium size channel letters
  • Backlighting of medium light boxes
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads