DALI2 PIR Sensor

Motion and Brightness

DMX2PWM Dimmers enable control of low-voltage LEDs using a DMX512 controller. Using PWM (Pulse-Width Modulation) technique, they are designed for use with constant voltage LEDs with a maximum output current of 2 A per channel, or 2.5 A for the three-channel version. DMX512 signal is amplified through DMX2PWM Dimmers for convenient daisy-chaining. DMX2PWM Dimmers’ flexibility makes installations easy with auto and manual DMX512 addressing modes, and in the case of the nine-channel version, the option of using an RJ45 connector or loose wire for DMX512 connection. The reverse supply protection and self-resetting over-current protection ensure safety against possible damage due to incorrect wiring. The nine-channel version is conveniently mountable inside equipment racks using standard 35 mm wide DIN rail.

IC 3 Channel: AA623900135
EAN 3 Channel: 4006584812233
IC 9 Channel: AA623910135
EAN 9 Channel: 4006584812257

Key features

  • Control of constant voltage LED fixtures
  • Three or Nine individually-controllable output channels via DMX512
  • Reverse supply protection and overcurrent protection (self resetting)
  • Smooth dimming via PWM with 488 Hz frequency
  • Manual address setting or auto-addressing selectable
  • Input voltage range: 12 ... 48 V DC
  • 14 bit PWM resolution calculated from 8bit DMX value

Technical Specifications

Dimensions (W x H x D)

94 x 71.5 x 24 mm / 3.66 x 2.81 x 0.94 inch

Weight 0.08 kg / 0.18 lbs
Power12 ... 48 V DC (screw terminals)
Quiescent current12 V: 35 mA
24 V: 21 mA
48 V: 15 mA
Max. output current2.5 A per channel
Operating temperature0 … 50 °C / 32 … 122 °F
Storage temperature-20 … 80 °C / -4 … 176 °F
Operating/storage hum.0 … 80% non-condensing
Protection classIP 20
Housing Aluminium
CertificationCE, ETL, UKCA
InputDMX512 (RJ45)
OutputDMX512 (RJ45) for chaining multiple devices
3 x output channels (screw terminals)
+ connector: on input voltage
- connector: low side PWM switch
Always select the power supply output voltage accordingly to your LED fixture input voltage!
12 V PSU for 12 V LED
24 V PSU for 24 V LED
48 V PSU for 48 V LED