The e:cue DMX to DALI/DSI converter allows the integration of DALI/DSI based dimming devices in DMX controlled surroundings. Its 6 outputs provide single channel DALI or DSI (user selectable) signals derived from 6 consecutive DMX channels for up to 96 dimming ballasts. It is either possible to connect all 96 DALI/DSI Fixtures to one output or a maximum of each 16 fixtures per output. Every DALI/DSI output uses a broadcast signal, which means all fixtures connected to one output will be set to the same values. Flexibility is ensured through user selectable auto or manual DMX addressing modes, RJ-45 or loose wiring in a DIN rail system housing. The device is optimized for performance in building automation environments. An additional plus is the compact form of the device as well as its ability to supports easy and intuitive setup in any lighting installation.

IC: AA761550027
EAN: 4055462032324

Key features

  • 6 outputs with either 1200 Baud DALI transfer speed or 600 baud DSI transfer speed controlled by 6 DMX channel
  • Up to 16 DALI/DSI ballasts per output, all controlled by the same DMX channel (broadcast mode)
  • Single 110-230V AC supply voltage
  • DMX connectors (RJ45) allow standard CAT5 wiring
  • Loose wiring (In/Out)
  • Power and DMX status LEDs
  • Manual and auto DMX addressing modes
  • DIP switches for configuration and manual addressing mode
  • User selectable number of DMX channels (1-6) 

Technical Specifications

Dimensions (W x H x D) 107 x 76 x 59 mm / 4.21 x 3 x 2.32 inch
Weight 300 g / 0.66 lbs
Power100 ... 240 V AC
Operating / storage temp.0 ... 40 °C / 32 ... 104 °F
Operating / storage hum.0 ... 80%, non-condensing
Protection classIP20
Housing Anodised aluminium and plastic
Mountingon 35 mm DIN rail
CertificationCE, UKCA
Interface6 x input DMX512, on spring terminal clamps, RJ45
6 x output DALI, on spring terminal clamps, RJ45