| e:cue

SYMPL bridge Node

sACN/Art-Net/e:net to DMX512/e:pix interface

The SYMPL Bridge Node is similar to the Bridge8 but the key difference is that besides DMX it also supports e:cue's own protocol “e:pix “. This grants full access to Traxon fixtures via the e:pix protocol by 3rd party controller utilizing Art-Net or sACN with up to 32 Universes. Enjoy the advantages of the e:pix protocol now also with any 3rd party controller.

The SMYPL bridge Node is especially designed for projects in tough outdoor environments. Designed for this use, it comes with integrated surge protection and components that allow a very high operating temperature - the outputs are isolated up to 3,75kV.The built-in web interface enables all parameters to be easily set and managed. With a freely definable DMX value the source IP (sACN/Art-Net Sender) can be easily changed to a different device.

IC: AM356970031

Key features

8 outputs for DMX512 or e:pix
Switch between two input sources
Isolated outputs up to 3,75kV
Support for unicast or multicast mode
Integrated protection against surge
Extended operating temperature -40….70°C*
Embedded temperature & humidity sensors (with Sympholight)
Reverse polarity protection
Backup-mode on data loss (With Sympholight)
Power-over-Ethernet
Test mode access via button
Web interface for status and configuration
Simple and easy integration in e:cue SYMPHOLIGHT
Flexible mounting on 35 mm DIN rails or vertical surfaces

Sympholight

Technical Specifications

Dimensions (W x H x D)	143 x 92 x 62 mm/ 5.63 x 3.6 x 2.4 in (excl. fastening clip)
Weight	250 g / 0.55 lb
Power supply	24 ... 48 V DC (terminal plug) or PoE IEEE 802.3af on RJ45
Power consumption	max. 8W (incl. DMX termination)
Operating temperature	-40 ... 50 °C/-4 ... 158 °F*
Storage temperature	-40 ... 50 °C/-4 ... 158 °F
Electrical safety	SELV
Operating/storage hum.	0 ... 80% non-condensing
Protection Class	IP20
Housing material	Self extinguishing blend PC/ABS
Mounting	on 35 mm DIN rail (DIN 43880) (19-inch rack), or with key hole on any stable vertical surface
Certification	CE, ETL
Interface	8 x DMX512 isolated in pairs (3.75 kV), surge protection, reverse polarity protection, 3-pin terminal plug
Interface specifications	VDMXmax/VDMXmin = 4.6 V/0.8 V Short circuit protected: I SCmax = 100 mA
Ethernet-Port	1 x e:net/ArtNet/sACN 10/100 Mbit/s RJ-45 , surge protection
Sensors	Temperature -40 ... 120 ±°C (0.2 °C) Humidity 0 ... 100% (±2%)
User interface	LEDs for error, Ethernet activity, device status, DMX status Identify button, Test button
* 70 °C / 158 °F for max. 1 hour/day; continuous operation at max. 60 °C / 140 °F.

Downloads

Specsheets

reduce

Manual