BeamZ MHL-363 16ch dmx

Dieses Thema enthält 3 Antworten und 2 Teilnehmer. Es wurde zuletzt aktualisiert von  bkruse vor 4 Jahre, 7 Monate.

  • Autor
    Beiträge
  • #218762

    masterdc
    Teilnehmer

    Hello everybody
    Please anyone can help me..how can add 3 fixtures ??
    I have 3 led wash and I wanna put tha on Ecue software but dont find the profile anywere
    I add 3 RGB Fader Dim and working..buts very complicated to programe something
    Sorry my english..
    Tank u very much

  • #226660

    bkruse
    Moderator

    Hi,

    the profile is not included, but you can easily create it yourself.
    Start the “Library Editor” and in the “User Library” tree, create the fixture manually. You can copy an existing fixture, which is similar, to save time. Then save the User Library and in Programmer do a File > New Show.
    Then your created fixture will be available.

    Note: in case you work on a different PC, export your User Library beforehand and import it on the different PC.

    hope that helps,
    Björn

  • #226661

    masterdc
    Teilnehmer

    hi..i try doing that and works but ween i use Till function the fixture make stroob… very strange 🙁

  • #226662

    bkruse
    Moderator

    Hi,

    then probably either the channels are not correctly mapped or maybe you have Pan/Tilt as 16bit channels (they use two DMX channels for one function)?

    Usually you set the “DMX Channel L ow Byte” to the DMX channel within that fixture (according to manufacturer spec) and leave “DMX Channel High Byte” at 0. For example if red is on channel 12, you set low byte = 12 and high byte = 0.
    In case of a 16 bit channel, then set “DMX Channel L ow Byte” AND “DMX Channel L ow Byte” (nearly always consecutive. For example if Pan is channel 8 (and Pan fine is ch9), you set low byte = 8 and high byte = 9.

    Martin > Max 250 is an example for 16bit Pan/Tilt.
    American DJ > DJ Spot 250 is an example for standard Pan/Tilt.

    hope that helps,
    Björn

Du musst angemeldet sein, um auf dieses Thema antworten zu können.