ecue programmer v7.0 – video capture setup

e:cue Forum Foren English Discussion Forums Support (E) ecue programmer v7.0 – video capture setup

Ansicht von 1 Antwort-Thema
  • Autor
    • #247267
      Anson Ip


      we had input a video source to the capture card but not able to select capture device from video capture setup in the ecue programmer.

      is there a capture software we need to install to the system in order to user the video capture function?
      what would be the recommended software/version?


    • #247275
      Björn KruseBjörn Kruse


      so you use a LCE2fx?
      Then the card is a Blackmagic “Intensity Pro 4K”, you should check if the drivers are correctly installed and up to date.

      This card needs exactly the same settings (resolution, refresh rate, etc.) as the source signal, otherwise it will most likely not work.

      The easiest way to check if it works in general, is the “Media Player” window in Programmer.
      – Open “Video Capture Setup” and choose the card.
      – Activate “Video Capture” and press “Play” button
      -> you should see the capture in the Media Player window

      If you use a different computer and capture device, please provide the details.
      If you encounter an error or get stuck, please provide the details.

      Hope that helps, Björn

Ansicht von 1 Antwort-Thema
  • Du musst angemeldet sein, um auf dieses Thema antworten zu können.