How to Syn the Ecue Programmer LCE 7.0 by internet.

e:cue Forum Foren English Discussion Forums Support (E) How to Syn the Ecue Programmer LCE 7.0 by internet.

Ansicht von 3 Antwort-Themen
  • Autor
    Beiträge
    • #218978
      Wilsonwon
      Teilnehmer

      I have a project which has been installed a three LCE MX in three different locations. Client wants us to syn the lighting show.at the same time. What can i do? Each locations can be connect to internet.
      Can we syn the clock for LCE MX by internet? How you do that?

    • #228238

      Hello there,
      the easiest way would either be to use a trigger based on time and date – which will be extremely precise based on what timeserver you sync your devices – or – if you have a VPN – to add all the devices in one environment and run them from one point

    • #228239
      Wilsonwon
      Teilnehmer

      Hello there,
      the easiest way would either be to use a trigger based on time and date – which will be extremely precise based on what timeserver you sync your devices – or – if you have a VPN – to add all the devices in one environment and run them from one point
      [/quote]

      Thanks Chris,
      If we use VPN, do you have any document or Manual we can study the method? These three locations was not in the same internal network. These three LCE MX was setup in three different Buildings.

    • #228243

      Hello,
      Well if you have all devices in the same VPN – easiest method would be via hardware VPN, maybe loot into cisco or other enterprise network devices – and your e:net discovery service is active – which it should be – your main show will find all devices so you can controll all remotely. Now your network latency is critical, if you REALLY want to run these shows absolutely simultaneous, a trigger set up to a certain time and all snyced to the same NTP would be by far the easier method.
      Cheers

Ansicht von 3 Antwort-Themen
  • Du musst angemeldet sein, um auf dieses Thema antworten zu können.